Home | E-mail landing | OA system
中文版
English
About Us
THTI
History
Structure
Management Team
Missions & Objectives
Service Mode
Research Centers
Industrialization Company
Tianjin Tsingke Environmental Protection Technology Co., Ltd.
Qingyan Huayu Intelligent Robot (Tianjin) Co., Ltd.
Tianjin SciTsing QuickBeam Tech.Co., Ltd.
Tsing Yan Testing (Tian jin) Co., Ltd.
Tianjin Clean-lub Lubrication Technology Co., Ltd
Tsinghua Tongchuang Robot Co.,Ltd
Tianjin Qingyan Juneng Technology Development Co., Ltd.
Tianjin Hwatsing Technology Co.,Ltd
Platform
Tianjin Equipment Manufacturing Friction & Consumption Reduction Engineering Center
Tianjin Technology Transfer Demonstration Institution
Tianjin Open and Sharing Platform for Large-scale Scientific Instruments
Student Science-oriented Innovation Practice Base of the Department of Mechanical Engineering, Tsinghua University
Tianjin Expert Service Base
R&D Management
Construction of Scientific Research Institutions
Scientific Research Project Management
Scientific Research Achievements
Scientific Research Qualifications
Laboratory Construction and Inspection/Testing
Specialized Master Training
Achievement of Technological Transformation
Industry Service
Innovation Carrier
Industry Services
Policy Support
Incubation Services
International Collaboration
Contact Us
News flash
Special column
Overview of Party History
Document learning
2019-02-21
Xi Jinping tells stories: let people see the dream ahead
All innovations in literature and art, in the final analysis, come directly or indirectly from the people. "The world is full of knowledge, and human feelings are articles." Art can fly the wings of imagination, but it must step on the solid earth. There are 100 or 1,000 methods of literary and artistic creation, but the most fundamental, critical and reliable way is to take root in the people and life. If Cao Xueqin had not made a panoramic observation and microscopic analysis of the social life at that time, it would have been impossible to complete the encyclopedic masterpiece of A Dream of Red Mansions. If Lu Xun was not familiar with the situation and mood of the people at the bottom before and after the 1911 Revolution, he would not have been able to shape Xianglin's sister-in-law, leap soil,
MORE
The branch of the high-end hospital held the 2018 year-end organization life meeting and the democratic appraisal party member meeting.
According to the Party Constitution and the "Regulations on the Work of the Communist Party of China Branch (Trial)" and other relevant party regulations, and in accordance with the work arrangements of the District Party Committee Organization Department and the Donglihu Street Party Working Committee, the Party Branch of the Tianjin High-end Equipment Research Institute of Tsinghua University (hereinafter referred to as the "High-end Institute Branch") earnestly carried out the 2018 year-end organization life meeting and democratic appraisal of party members, and organized party members in the form of the pre-meeting on January 25, 2019. On February 18, the 2018 year-end organization life meeting and democratic appraisal party member meeting of the high-end hospital branch were officially held, with Zhai Jiting, deputy director of Dongli Lake Street Office, attending as a nonvoting participant. 201
2019-02-25
The Seven "First" of the Second National Congress of the Communist Party of China"
On July 16, 1922, the Second National Congress of the Communist Party of China opened in Shanghai. 625 Fudeli, South Chengdu Road, where the meeting was held, was Li Da's apartment at that time. At a large meeting, Li Da was elected director of publicity of the Central Bureau. One year later, members of the Central Bureau, representatives of local party organizations, and some members who returned to China after participating in the first congress of the Communist Parties and national revolutionary groups in the Far East, a total of 12 Communist Party members gathered together and held the Second National Congress. At the eight-day meeting, nine resolutions were passed, including the Declaration of the second National Congress of the Communist Party of China, the constitution of the Communist Party of China and the resolution on the constitution of the Communist Party. This means that the Second National Congress and the First National Congress have jointly completed the task of founding the party, marking that the founding of the Communist Party of China has entered a new stage. The Second National Congress of the Communist Party of China put forward the party's democratic revolution program for the first time, put forward the party's united front thought for the first time, formulated the first "Party Constitution", and publicly issued the "Chinese Communist Manifesto" for the first time. The movement, the women's movement and the youth movement put forward requirements, decided to join the Communist International for the first time, and put forward the slogan "Long live the Communist Party of China" for the first time. At this point, the situation of the Chinese revolution is moving towards a clearer path. From January 1922 to February 1923, more than 100 strikes broke out across the country, and more than 300000 workers participated in the strike. The political consciousness of the workers increased rapidly, and the degree of organization also increased significantly. At the same time, the party led The peasant, youth, and women's movements also showed a new look. (From the Liberation Daily on June 7, 2011, the original title was "The Place where the Party Constitution was born")
2019-02-26
Further Enhance the Organizational Power of Grassroots Party Organizations and Highlight Political Functions
习近平总书记在党的十九大报告中指出:“党的基层组织是确保党的路线方针政策和决策部署贯彻落实的基础。要以提升组织力为重点,突出政治功能,把企业、农村、机关、学校、科研院所、街道社区、社会组织等基层党组织建设成为宣传党的主张、贯彻党的决定、领导基层治理、团结动员群众、推动改革发展的坚强战斗堡垒”。这一重要论述,深刻揭示了基层党组织建设的内在规律,是新时代党的建设总要求的题中应有之义,具有明确的思想内涵和鲜明的指向要求。党的基层组织不是一般的社会组织,不能把它混同于一般民间团体,而是政治组织。鲜明的政治属性是其根本属性,鲜明的政治功能是其基本功能。 必须把提升组织力摆在重要位置。基层党组织是党的组织基础。党章规定:“党的基层组织是党在社会基层组织中的战斗堡垒,是党的全部工作和战斗力的基础。”这一重要概括,明确了党的基层组织的政治地位和作用,为加强党的基层组织建设指明了方向。党的力量源于组织,党自身强大的战斗力和凝聚力,来源于党严密的组织结构和全体成员行动的一致。基层党组织提升组织力就是把广大党员团结凝聚在党的旗帜之下,实现最广大人民的根本利益。 基层党组织提升组织力。一要加强党支部建设,明确党支部的地位和作用。要结合新的实际,推进党的基层组织设置和活动方式创新,调整党的总支部委员会、支部委员会每届任期期限,推进“两学一做”学习教育常态化制度化。加强基层党组织带头人队伍建设,扩大基层党组织覆盖面,着力解决一些基层党组织弱化、虚化、边缘化问题。党支部要担负好直接教育党员、管理党员、监督党员和组织群众、宣传群众、凝聚群众、服务群众的职责,引导广大党员发挥先锋模范作用,把党支部的战斗堡垒作用充分发挥出来。 二要严格党的组织生活制度。每名党员必须增强党的意识,时刻牢记自己第一身份是党员,在党言党、在党爱党。因此,基层党组织和党员要建立经常性谈心谈话制度,开好民主生活会和组织生活会,认真开展批评与自我批评;要进一步规范落实好“三会一课”制度,突出党性锻炼,坚决防止表面化、形式化、娱乐化、庸俗化现象;要坚持民主评议党员制度、积极推行主题党日活动等多种丰富多彩的政治活动,落实管党治党责任。 必须把为民办实事、好事作为工作的基本出发点和落脚点。基层党组织是党联系群众的桥梁和纽带,遍布全国各个行业、各领域、各种人群之中。基层党组织处于生产工作的第一线,处于同人民群众最接近的地位。党在群众中的政治领导力、党的思想引领力、群众组织力、社会号召力,就是靠基层党组织这种具体而细致的工作来实现的。 基层党组织为民办实事、好事。一要牢记党的宗旨,挺起共产党人的精神脊梁。党的宗旨决定了基层党组织必须将服务体现于党组织活动之中。当前,中国特色社会主义进入新时代,我国社会主要矛盾已经转化为人民日益增长的美好生活需要和不平衡不充分的发展之间的矛盾,这赋予了基层党组织更高的职责和任务。“民心是最大的政治”。基层党组织把党的政策转化为群众的自觉行动,带领群众创造幸福美好生活,正是我们党顺应时代要求和群众期盼的必然举措,也是践行党的根本宗旨和群众路线的具体体现。广大基层党组织要紧紧围绕为民办实事、好事这个定位和要求,不断增强服务意识,改进服务作风,提高服务能力,在改革发展稳定中真正成为群众的主心骨和领路人。 二要正确处理好基层党组织的政治功能和服务功能的关系。政治功能和服务功能是紧密相联的统一整体。服务群众是政治功能的题中应有之义,政治功能寓于服务功能之中,服务功能是党的政治功能在实践过程中的具体体现和延伸拓展,不能把两者对立,分割开来,而是要统一于我们党的性质和宗旨之中。 必须把维护党中央权威和集中统一领导作为最高政治原则。基层党组织是实现党的全面领导的重要环节。要坚持党对一切工作的领导,党的领导不是抽象的而是具体的,既体现在党要根据中国经济社会各个阶段的发展现状带领人民制定正确的路线方针和政策,也体现在党要动员人民、组织人民、领导人民将党的正确主张转变为人民的自觉行动,贯彻落实到实践中去,为此,党在各条战线的基层党组织都要突出政治功能,承担起应有的责任。 基层党组织是为实现党的政治任务而存在和发展的,它首先应当在思想政治方面实施领导,保证党的各项政策和任务在基层的落实,同时还要加强对经济组织、行政组织和群众组织的领导,支持它们的工作,充分发挥它们的作用。基层党组织要在各种社会组织中发挥领导核心作用,还要支持和保证各种社会组织依照法律和章程充分行使职权。基层党组织和广大党员通过发挥各自作用,积极组织和参与社会活动,真正承担起党要管党、全面从严治党的政治责任,引导广大党员增强纪律和规矩意识,在各种歪风邪气、腐败现象面前,敢于挺身而出、旗帜鲜明作斗争,从而把广大群众凝聚和团结起来,实现党的各项任务的完成。 基层党组织牢固树立“四个意识”,坚决维护党中央权威和集中统一领导。一要树立政治意识。面对当前复杂形势、艰巨任务和严峻考验,要始终做政治上的明白人,增强政治定力、纪律定力、道德定力、抵腐定力。坚定执行党的政治路线,严格遵守政治纪律和政治规矩,在政治立场、政治方向、政治原则、政治道路上同党中央保持高度一致,这是基层党组织突出政治功能必须牢牢把握的政治方向。二要树立大局意识。自觉从大局看问题,把本区域工作放到全国大局中去思考、定位,强化责任担当,做到正确认识大局、自觉服从大局、坚决维护大局,确保中央决策部署在基层落地生根。三要树立核心意识。自觉维护习近平总书记的核心地位。努力锤炼政治品格,始终做到拥护核心、坚决听从核心、坚决维护核心,确保党的全面领导更加坚强有力。四要自觉增强看齐意识。坚决防止和反对宗派主义、圈子文化、码头文化,坚决反对搞两面派、做两面人。用习近平新时代中国特色社会主义思想武装头脑,指导实践,确保基层的各项工作沿着正确方向不断开拓前进。
2019-02-27
A Cultural Advertisement of Mao Zedong's Early Years
In 1920, Mao Zedong, Peng Huang, Yi Lirong and others organized a cultural publishing house in Changsha, Hunan, which mainly sold various books and newspapers reflecting ideological changes at home and abroad, such as Darwin's Origin of Species, Kropotkin's Thoughts, New Youth, Young China, New Life, etc., to spread new culture and new ideas and promote social change. After the opening of the book club, how to expand the influence and open the market has become a problem that Mao Zedong and others need to consider. In this regard, Mao Zedong is quite intelligent. He took up the pen in his hand and drafted a number of cultural advertisements for publicity and promotion, including the "Cultural Book Club Announces the Good Learning" and "Wen
Leaders of Tianjin and Dongli District Science and Technology Bureau visited our hospital for investigation and discussion.
On the afternoon of February 26, Liu Huizhong, director of the High-tech Division of Tianjin Science and Technology Bureau, Wang Zhenxiang, deputy director, and Zhou Ming, a researcher, accompanied by Li Chunjie, secretary of the party group and director of Dongli District Science and Technology Bureau, Wei Jun, deputy director, and relevant responsible comrades of Huaming Management Committee, went to Tianjin High-end equipment Research Institute of Tsinghua University (referred to as "High-end Institute"). He Yongyong, executive vice president of the high-end hospital, and Fan Jing, vice minister of the hospital affairs department, received the research delegation, and the two sides held a forum for in-depth exchanges. He Yongyong made a report. He Yongyong first made a detailed report to the leaders of the Science and Technology Bureau on the construction of scientific research institutions, tackling key technical problems and the development of derivative enterprises in high-end institutes. He Yongyong said that this year is the fifth year of the development of the high-end institute. The high-end institute will actively optimize and improve the platform construction to better improve its self-hematopoietic ability; expand the overall scale of scientific research institutions and improve the comprehensive level of the scientific research system; at the same time, Actively promote the development of derivative enterprises, help enterprises solve various problems, and realize the benign operation of enterprises. He Yongyong pointed out that the vigorous development of high-end institutes is inseparable from the excellent policies of the municipal and district science and technology bureaus, and even more inseparable from the service guarantees of various commissions. The high-end institutes will continue to adopt the purpose of "Tsinghua Science and Technology, serving the society" and actively Promote the implementation of various outstanding R & D achievements of Tsinghua University, and strive to create a "handshake zone" for the deep integration of R & D, industry and finance ". Li Chunjie, Secretary of the Party Leadership Group and Director of the Dongli District Science and Technology Bureau Li Chunjie said that as a "link", the Dongli District Science and Technology Bureau must cooperate with the Municipal Science and Technology Bureau to complete various tasks on the one hand, and on the other hand, it must do a good job in various services to the grassroots. This year, a special service mechanism will be established to ensure effective communication with institutions and timely resolution of problems. During the discussion by Liu Huizhong, Director of the High-tech Division of Tianjin Science and Technology Bureau, Liu Huizhong affirmed the outstanding achievements of high-end institutes and derivative companies in recent years. He hoped that the high-end institutes, as one of the first batch of industrial technology research institutes, can generate more results transformation companies., Through the development of the enterprise, make greater contributions to the industry and the locality. At the same time, Liu Huizhong emphasized that talent team building is an important support for the realization of a virtuous circle and rapid development of the enterprise. He hopes that the high-end hospital will continue to develop efficiently and gain more social support and the favor of the capital market. Liu Huizhong finally said that the leading role of the new R & D institution construction concept is very important. He expects the research institute's model to achieve good development in Tianjin. The Municipal Science and Technology Bureau will continue to provide strong support in technology, platform and finance. In the future, the high-end hospital will continue to strengthen the platform construction, serve the regional economic construction with stronger strength, and promote the high-quality, comprehensive and rapid development of our city with innovation. The newspaper article/Zhang Shu map/Zhang Shu
2019-02-28
The Central Committee of the Communist Party of China issued the "Regulations on the request for instructions and reports on major matters of the Communist Party of China"
近日,中共中央印发了《中国共产党重大事项请示报告条例》(以下简称《条例》),并发出通知,要求各地区各部门认真遵照执行。 通知指出,请示报告制度是我们党的一项重要政治纪律、组织纪律、工作纪律,是执行民主集中制的有效工作机制,对于坚决维护习近平总书记党中央的核心、全党的核心地位,坚决维护党中央权威和集中统一领导,保证全党团结统一和行动一致,具有重要意义。制定出台《条例》,有利于提高重大事项请示报告工作制度化、规范化、科学化水平。 通知要求,各级党组织要认真组织学习《条例》,使广大党员干部准确把握重大事项请示报告的重要意义、基本原则、主要内容和工作要求,强化思想自觉和行动自觉。各级领导干部要切实负起政治责任,保证本地区本部门严格按照《条例》规定的主体、事项、程序和方式,认真做好请示报告工作。中央各部门、中央国家机关党组(党委)要带头执行《条例》,切实加强向党中央请示报告工作,并按照《条例》要求加强对本系统本领域请示报告工作的指导。要加强对《条例》执行情况的监督检查,确保各项规定不折不扣落实。 《中国共产党重大事项请示报告条例》全文如下。 第一章总则 第一条为了加强和规范重大事项请示报告工作,严明党的政治纪律、组织纪律和工作纪律,保证全党全国服从党中央、政令畅通,根据《中国共产党章程》、《关于新形势下党内政治生活的若干准则》等党内法规,制定本条例。 第二条重大事项请示报告工作以习近平新时代中国特色社会主义思想为指导,坚持和加强党的全面领导,坚持党要管党、全面从严治党,贯彻民主集中制,坚决维护习近平总书记党中央的核心、全党的核心地位,坚决维护党中央权威和集中统一领导,保证全党团结统一和行动一致,确保党始终总揽全局、协调各方。 第三条本条例适用于下级党组织向上级党组织,以及党员、领导干部向党组织请示报告重大事项相关活动。 本条例所称重大事项,是指超出党组织和党员、领导干部自身职权范围,或者虽在自身职权范围内但关乎全局、影响广泛的重要事情和重要情况,包括党组织贯彻执行党中央决策部署和上级党组织决定、领导经济社会发展事务、落实全面从严治党责任,党员履行义务、行使权利,领导干部行使权力、担负责任的重要事情和重要情况。 本条例所称请示,是指下级党组织向上级党组织,党员、领导干部向党组织就重大事项请求指示或者批准;所称报告,是指下级党组织向上级党组织,党员、领导干部向党组织呈报重要事情和重要情况。 第四条开展重大事项请示报告工作应当遵循以下原则: (一)坚持政治导向。树牢“四个意识”,落实“四个服从”,把请示报告作为重要政治纪律和政治规矩,把讲政治要求贯彻到请示报告工作全过程和各方面。 (二)坚持权责明晰。既牢记授权有限,该请示的必须请示,该报告的必须报告;又牢记守土有责,该负责的必须负责,该担当的必须担当。 (三)坚持客观真实。全面如实请示报告工作、反映情况、分析问题、提出建议,既报喜又报忧、既报功又报过、既报结果又报过程。 (四)坚持规范有序。落实依规治党要求,严格按照党章党规规定的主体、范围、程序和方式开展重大事项请示报告工作。 第五条各地区各部门党组织承担重大事项请示报告工作主体责任,党组织主要负责同志为第一责任人,对请示报告工作负总责。 中央办公厅负责接受办理向党中央请示报告的重大事项,并统筹协调和督促指导各地区各部门向党中央的请示报告工作。地方党委办公厅(室)负责接受办理向本级党委请示报告的重大事项,并统筹协调和督促指导本地区的请示报告工作。 第二章党组织请示报告主体 第六条党组织请示报告工作一般应当以组织名义进行,向负有领导或者监督指导职责的上级党组织请示报告。特殊情况下,可以根据工作需要以党组织负责同志名义代表党组织请示报告。 请示报告应当逐级进行,一般不得越级请示报告。特殊情况下,可以按照有关规定直接向更高层级党组织请示报告。 第七条接受双重领导的单位党组织,应当根据事项性质和内容向负有主要领导职责的上级党组织请示报告,同时抄送另一个上级党组织。特殊情况下,可以不抄送另一个上级党组织。 第八条接受归口领导、管理的单位党组织,必须服从批准其设立的党组织的领导,向其请示报告工作,并按照有关规定向归口领导、管理单位党组织请示报告。 第九条接受归口指导、协调或者监督的单位党组织,向上级党组织请示报告一般应当抄送负有指导、协调或者监督职责的单位党组织。 负有指导、协调或者监督职责的单位党组织应当统筹所负责区域、领域、行业、系统内各单位党组织的请示报告工作,归口统一向上级党组织请示报告总体情况、牵头事项完成情况等。 第十条涉及跨区域、跨领域、跨行业、跨系统的重大事项,应当由有关党组织向共同上级党组织联合请示报告。联合请示报告应当明确牵头党组织。 党政机关联合请示报告的,一般应当将上级党政机关同时列为请示报告对象。 第十一条根据党内法规制度规定,党的决策议事协调机构和党的工作机关可以在其职权范围内接受下级党组织的请示报告并作出处理。 党组织主要负责同志可以就全面工作或者某些方面工作接受下级党组织请示报告;有关负责同志可以就分管领域工作接受下级党组织请示报告,也可以受党组织或者党组织主要负责同志委托,就全面工作接受下级党组织请示报告。 第三章党组织请示报告事项 第十二条涉及党和国家工作全局的重大方针政策,经济、政治、文化、社会、生态文明建设和党的建设中的重大原则和问题,国家安全、港澳台侨、外交、国防、军队等党中央集中统一管理的事项,以及其他只能由党中央领导和决策的重大事项,必须向党中央请示报告。 第十三条党组织应当向上级党组织请示下列事项: (一)贯彻落实党中央决策部署和上级党组织决定中的重要情况和问题,需要作出调整的政策措施,需要支持解决的特殊困难; (二)重大改革措施、重大立法事项、重大体制变动、重大项目推进、重大突发事件、重大机构调整、重要干部任免、重要表彰奖励、重大违纪违法和复杂敏感案件处理等; (三)明确规定需要请示的重要会议、重要活动、重要文件等; (四)重大活动、重要政策的宣传报道口径,新闻宣传和意识形态工作中的全局性问题和不易把握的问题; (五)出台重大创新举措,特别是遇到新情况新问题且无明文规定、需要先行先试,或者创新举措可能与现行规定相冲突、需经授权才能实施的情况; (六)属于自身职权范围内但事关重大或者特殊敏感的事项; (七)重大决策时存在较大意见分歧的情况; (八)跨区域、跨领域、跨行业、跨系统工作中需要上级党组织统筹推进的重大事项; (九)调整上级党组织文件、会议精神的传达知悉范围,使用上级党组织负责同志未公开的讲话、音像资料等; (十)其他应当请示的重大事项。 下列事项不必向上级党组织请示:属于自身职权范围内的日常工作;上级党组织就有关问题已经作出明确批复的;事后报告即可的事项等。 第十四条党组织应当向上级党组织报告下列事项: (一)学习贯彻习近平新时代中国特色社会主义思想,统筹推进“五位一体”总体布局和协调推进“四个全面”战略布局的重要情况; (二)党中央以及上级党组织重要会议、重要文件、重大决策部署贯彻落实情况,习近平总书记重要指示批示贯彻落实情况,上级党组织负责同志交办事项的研究办理情况; (三)加强党的建设,履行全面从严治党责任,包括集中学习教育活动、意识形态工作、党组织设置及隶属关系调整、民主生活会、党风廉政建设、落实中央八项规定精神、党员干部直接联系群众、巡视巡察整改、发现重大违纪违法问题等情况; (四)全面工作总结和计划; (五)重大专项工作开展情况; (六)重大敏感事件、突发事件和群体性事件应对处置情况; (七)经济社会发展中出现的重要情况和重大舆情; (八)本地区、本部门、本单位工作中具有在更大范围推广价值的经验做法和意见建议; (九)其他应当报告的重大事项。 下列事项不必向上级党组织报告:具体事务性工作;没有实质性内容的表态和情况反映等。 第十五条党组织应当按照有关规定向上级党组织报备下列事项: (一)党内法规和规范性文件; (二)领导班子成员分工; (三)有关干部任免; (四)党委委员、候补委员职务的辞去、免去或者自动终止; (五)其他应当报备的重大事项。 第十六条中央各决策议事协调机构、中央各部门、有关中央国家机关党组(党委)应当对本领域、行业、系统内请示报告的具体事项提出明确要求、加强工作指导。 上级党组织应当从实际出发,对下级党组织请示报告中主题相近、内容关联的同类事项归并整合提出要求,促使请示报告精简务实。 第十七条党组织应当根据本条例规定的请示报告事项范围和内容,结合上级要求和自身实际,制定请示报告事项清单。 第四章党组织请示报告程序 第十八条重大事项请示报告一般应当经党组织领导班子集体研究或者传批审定,由主要负责同志签发或者作出。必要时应当事先报上级党组织分管负责同志同意。 两个以上党组织联合请示报告的,应当协商一致后呈报。未取得一致意见的,应当对有关情况作出说明。 第十九条向上级党组织请示重大事项,必须事前请示,给上级党组织以充足研判和决策时间。情况紧急来不及请示必须临机处置的,应当按照规定履职尽责,并及时进行后续请示报告。 定期报告按照规定的时间进行。专题报告根据工作进展情况适时进行,学习贯彻上级党组织重要会议和文件精神的专题报告应当注重反映落实见效情况,不得一味求快。对上级党组织交办的重大事项,应当按照时限要求报告。突发性重大事件应当及时报告,并根据事件发展处置情况做好续报工作。 第二十条提出请示应当阐明请求事项及相关理由。报送请示应当一文一事,不得在报告等非请示性公文中夹带请示事项。 对下级党组织请示的重大事项,受理党组织如需以其名义再向上级党组织请示的,应当认真研究并负责任地提出处理建议,不得只将原文转请示上级党组织。 第二十一条上级党组织收到请示后,一般由综合部门提出拟办意见报党组织负责同志按照规定批办。 党政机关联合提出的请示,由上级党组织牵头办理。 第二十二条上级党组织对受理的紧急请示事项应当尽快办理。有明确办理时限要求的应当在规定期限内办理完毕,确有特殊情况无法在规定期限内办理完毕的,应当主动向下级党组织说明情况。 第二十三条请示的答复一般应当坚持向谁请示由谁答复,特殊情况下受理请示的党组织可以授权党组织有关部门代为答复。 第二十四条报告应当具有实质性内容和参考价值,有助于上级党组织了解情况、科学决策,力戒空洞无物、评功摆好、搞形式主义。报告应当简明扼要、文风质朴,呈报党中央的综合报告一般在5000字以内,专项报告一般在3000字以内,情况复杂、确有必要详细报告的有关内容可以通过附件反映。 第二十五条上级党组织收到报告后,应当由综合部门根据工作需要报送党组织负责同志阅示。综合部门可以将主题相同、内容相近的报告统一集中报送,或者摘要形成综合材料后报送。 党组织负责同志对报告作出批示指示的,综合部门应当及时按照要求办理。 第二十六条上级党组织应当加强对报告的综合分析利用。对于有推广价值的典型经验做法,可以通过适当形式进行宣传;对于共性问题,应当予以重视并研究解决;对于有价值的意见建议,应当认真研究吸收、推动改进工作。 第二十七条重大事项请示报告工作存在可能影响公正办理情形的,有关人员应当回避。 第五章党组织请示报告方式 第二十八条党组织应当根据重大事项类型和缓急程度采用口头、书面方式进行请示报告。 第二十九条重大事项请示报告适宜简便进行的,可以采用口头方式。对于情况紧急或者重大事项处理尚处于初步酝酿阶段的,可以采用口头方式先行请示报告,后续再以书面方式补充请示报告。 第三十条口头请示报告视情采用通话、当面、会议等方式。内容较为简单或者情况十分紧急的,可以采用通话方式;内容较为复杂或者情况敏感特殊的,可以采用当面方式;内容较为正式或者涉及主体较多的,可以采用会议方式。 口头请示报告应当做好记录和资料留存,确保有据可查。 第三十一条非紧急情况、重大事项处理处于相对成熟阶
2019-03-01
Xi Jinping Preface to the Fifth Batch of National Cadre Learning and Training Materials
善于学习,就是善于进步。党的历史经验和现实发展都告诉我们,没有全党大学习,没有干部大培训,就没有事业大发展。面对当今世界百年未有之大变局,面对进行伟大斗争、伟大工程、伟大事业、伟大梦想的波澜壮阔实践,我们党要团结带领全国各族人民抓住和用好我国发展重要战略机遇期,坚持和发展中国特色社会主义,统筹推进“五位一体”总体布局、协调推进“四个全面”战略布局,推进国家治理体系和治理能力现代化,促进人的全面发展和社会全面进步,防范和应对各种风险挑战,实现“两个一百年”奋斗目标、实现中华民族伟大复兴的中国梦,就必须更加崇尚学习、积极改造学习、持续深化学习,不断增强党的政治领导力、思想引领力、群众组织力、社会号召力,不断增强干部队伍适应新时代党和国家事业发展要求的能力。 我们党依靠学习创造了历史,更要依靠学习走向未来。要加快推进马克思主义学习型政党、学习大国建设,坚持把学习贯彻新时代中国特色社会主义思想作为重中之重,坚持理论同实际相结合,悟原理、求真理、明事理,不断增强“四个意识”、坚持“四个自信”、做到“两个维护”,教育引导广大党员、干部按照忠诚干净担当的要求提高自己,努力培养斗争精神、增强斗争本领,使思想、能力、行动跟上党中央要求、跟上时代前进步伐、跟上事业发展需要。抓好全党大学习、干部大培训,要有好教材。这批教材阐释了新时代中国特色社会主义思想的重大意义、科学体系、精神实质、实践要求,各级各类干部教育培训要注重用好这批教材。 习近平 2019年2月27日 中共中央总书记、国家主席、中央军委主席习近平为即将出版发行的第五批全国干部学习培训教材作序。他强调,我们党依靠学习创造了历史,更要依靠学习走向未来。要加快推进马克思主义学习型政党、学习大国建设,坚持把学习贯彻新时代中国特色社会主义思想作为重中之重,坚持理论同实际相结合,悟原理、求真理、明事理,不断增强“四个意识”、坚持“四个自信”、做到“两个维护”,教育引导广大党员、干部按照忠诚干净担当的要求提高自己,努力培养斗争精神、增强斗争本领,使思想、能力、行动跟上党中央要求、跟上时代前进步伐、跟上事业发展需要。 习近平指出,善于学习,就是善于进步。党的历史经验和现实发展都告诉我们,没有全党大学习,没有干部大培训,就没有事业大发展。面对当今世界百年未有之大变局,面对进行伟大斗争、伟大工程、伟大事业、伟大梦想的波澜壮阔实践,我们党要团结带领全国各族人民抓住和用好我国发展重要战略机遇期,坚持和发展中国特色社会主义,统筹推进“五位一体”总体布局、协调推进“四个全面”战略布局,推进国家治理体系和治理能力现代化,促进人的全面发展和社会全面进步,防范和应对各种风险挑战,实现“两个一百年”奋斗目标、实现中华民族伟大复兴的中国梦,就必须更加崇尚学习、积极改造学习、持续深化学习,不断增强党的政治领导力、思想引领力、群众组织力、社会号召力,不断增强干部队伍适应新时代党和国家事业发展要求的能力。 习近平强调,抓好全党大学习、干部大培训,要有好教材。这批教材阐释了新时代中国特色社会主义思想的重大意义、科学体系、精神实质、实践要求,各级各类干部教育培训要注重用好这批教材。(序言全文另发) 第五批全国干部培训教材由全国干部培训教材编审指导委员会组织编写,包括《新时代新思想新征程》《建设现代化经济体系》《发展社会主义民主政治》《推动社会主义文化繁荣兴盛》《改善民生和创新社会治理》《推进生态文明建设美丽中国》《决胜全面建成小康社会》《将改革进行到底》《建设社会主义法治国家》《全面加强党的领导和党的建设》《全面践行总体国家安全观》《全面推进国防和军队现代化》《坚持“一国两制”推进祖国统一》《全面推进中国特色大国外交》等14本,由人民出版社、党建读物出版社出版。
2019-03-02
The General Office of the Central Committee of the Communist Party of China and the General Office of the State Council issued the Regulations on the Food Safety Responsibility System for Local Party and Government Leaders
近日,中共中央办公厅、国务院办公厅印发了《地方党政领导干部食品安全责任制规定》,并发出通知,要求各地区各部门认真遵照执行。 《地方党政领导干部食品安全责任制规定》全文如下。 第一章 总则 第一条 为了进一步落实食品安全党政同责要求,强化食品安全属地管理责任,健全食品安全工作责任制,保障人民群众“舌尖上的安全”,根据有关党内法规和国家法律,制定本规定。 第二条 本规定所称食品安全包括食用农产品质量安全。 本规定所称分管食品安全工作是指分管食用农产品质量安全监管、食品安全监管等工作。 本规定所称食品安全相关工作是指卫生健康、生态环境、粮食、教育、政法、宣传、民政、建设、文化、旅游、交通运输等行业或者领域与食品安全紧密相关的工作,以及为食品安全提供支持的发展改革、科技、工信、财政、商务等领域工作。 第三条 本规定适用于县级以上地方各级党委和政府领导班子成员(以下统称地方党政领导干部)。 第四条 实行地方党政领导干部食品安全责任制,必须坚持以习近平新时代中国特色社会主义思想为指导,增强“四个意识”、坚定“四个自信”、做到“两个维护”,牢固树立以人民为中心的发展思想,贯彻落实食品安全“四个最严”的要求,深入实施食品安全战略,承担起“促一方发展、保一方平安”的政治责任,不断提高食品安全工作水平,努力增强人民群众的获得感、幸福感、安全感。 第五条 建立地方党政领导干部食品安全工作责任制,应当遵循以下原则: (一)坚持党政同责、一岗双责,权责一致、齐抓共管,失职追责、尽职免责; (二)坚持谋发展必须谋安全,管行业必须管安全,保民生必须保安全; (三)坚持综合运用考核、奖励、惩戒等措施,督促地方党政领导干部履行食品安全工作职责,确保党中央、国务院关于食品安全工作的决策部署贯彻落实。 第六条 地方各级党委和政府对本地区食品安全工作负总责,主要负责人是本地区食品安全工作第一责任人,班子其他成员对分管(含协管、联系,下同)行业或者领域内的食品安全工作负责。 第二章 职责 第七条 地方各级党委主要负责人应当全面加强党对本地区食品安全工作的领导,认真贯彻执行党中央关于食品安全工作的方针政策、决策部署和指示精神,上级党委的决定和相关法律法规要求,职责主要包括: (一)组织学习贯彻习近平总书记关于食品安全工作的重要指示批示精神和党中央关于食品安全工作的方针政策、决策部署,不断提高地方党政领导干部的政治站位,增强做好食品安全工作的责任感和使命感; (二)全面加强党对本地区食品安全工作的领导,将食品安全工作作为向党委全会报告的重要内容; (三)建立健全党委常委会委员食品安全相关工作责任清单,督促党委常委会其他委员履行食品安全相关工作责任,并将食品安全工作纳入地方党政领导干部政绩考核内容; (四)开展食品安全工作专题调研,召开党委常委会会议或者专题会议,听取食品安全工作专题汇报,及时研究解决食品安全工作重大问题,推动完善食品安全治理体系; (五)加强食品安全工作部门领导班子建设、干部队伍建设和机构建设,不断提升食品安全治理能力; (六)协调各方重视和支持食品安全工作,加强食品安全宣传,把握正确舆论导向,营造良好工作氛围。 第八条 地方各级政府主要负责人应当加强对本地区食品安全工作的领导,认真贯彻执行党中央、国务院关于食品安全工作的方针政策、决策部署和指示精神,上级党委和政府、本级党委的决定和相关法律法规要求,职责主要包括: (一)领导本地区食品安全工作,组织推动地方政府落实食品安全属地管理责任; (二)坚持新发展理念,正确处理发展和安全的关系,将食品安全工作纳入本地区国民经济和社会发展规划、政府工作重点,并接受人大、政协的监督; (三)建立健全本地区食品安全监管责任体系,明确本级政府领导班子成员食品安全工作责任和政府相关部门食品安全工作职责,指导督促政府领导班子成员和相关部门落实工作责任; (四)加强食品安全监管能力、执法能力建设,整合监管力量,优化监管机制,提高监管、执法队伍专业化水平,建立健全食品安全财政投入保障机制,保障监管、执法部门依法履职必需的经费和装备; (五)开展食品安全工作专题调研,组织召开政府常务会议、办公会议或者专题会议,听取本地区食品安全工作汇报,及时研究解决食品安全工作突出问题; (六)落实高质量发展要求,推进食品及食品相关产业转型升级,不断提高产业发展水平。 第九条 地方各级党委常委会其他委员应当按照职责分工,加强对分管行业或者领域内食品安全相关工作的领导,协助党委主要负责人,统筹推进分管行业或者领域内食品安全相关工作,督促指导相关部门依法履行工作职责,及时研究解决分管行业或者领域内食品安全相关工作问题。 第十条 地方各级政府分管食品安全工作负责人应当加强对本地区食品安全监管工作的领导,具体负责组织本地区食品安全监管工作,职责主要包括: (一)协助党委和政府主要负责人落实食品安全属地管理责任,组织制定贯彻落实党中央、国务院关于食品安全工作的方针政策、决策部署和指示精神,上级以及本级党委和政府的决定和相关法律法规的具体措施; (二)组织开展食品安全工作专题调研,研究制定本地区食品安全专项规划、年度重点工作计划,统筹推进本地区食品安全工作; (三)组织协调食品安全监管部门和相关部门,及时分析食品安全形势,研究解决食品安全领域相关问题,推动完善“从农田到餐桌”全链条全过程食品安全监管机制; (四)组织推动食品安全监管部门和相关部门建立信息共享机制,推进“互联网+”食品安全监管,不断提升食品安全监管效能和治理能力现代化水平; (五)组织实施食品安全风险防控、隐患排查和专项治理,坚决防范系统性、区域性食品安全风险; (六)组织制定食品安全事故应急预案,及时组织开展本地区食品安全突发事件应对处置和调查处理; (七)组织开展食品安全工作评议考核,督促本级政府相关部门和下级政府落实食品安全工作责任; (八)组织开展食品安全普法和科普宣传、安全教育、诚信体系建设等工作,推动食品安全社会共治。 第十一条 地方各级政府领导班子其他成员应当按照职责分工,加强对分管行业或者领域内食品安全相关工作的领导,协助政府主要负责人,统筹推进分管行业或者领域内食品安全相关工作,督促指导相关部门依法履行工作职责,及时研究解决分管行业或者领域内食品安全相关工作问题。 第三章 考核监督 第十二条 地方各级党委和政府应当对落实食品安全重大部署、重点工作情况进行跟踪督办。 第十三条 地方各级党委应当结合巡视巡察工作安排,对地方党政领导干部履行食品安全工作职责情况进行检查。 第十四条 地方各级党委和政府应当充分发挥评议考核“指挥棒”作用,推动地方党政领导干部落实食品安全工作责任。 第十五条 跟踪督办、履职检查、评议考核结果应当作为地方党政领导干部考核、奖惩和使用、调整的重要参考。因履职不到位被追究责任的地方党政领导干部,在评优评先、选拔任用等方面按照有关规定执行。 第四章 奖惩 第十六条 地方党政领导干部在食品安全工作中敢于作为、勇于担当、履职尽责,有下列情形之一的,按照有关规定给予表彰奖励: (一)及时有效组织预防食品安全事故和消除重大食品安全风险隐患,使国家和人民群众利益免受重大损失的; (二)在食品安全工作中有重大创新并取得显著成效的; (三)连续在食品安全工作评议考核中成绩优秀的; (四)作出其他突出贡献的。 第十七条 地方党政领导干部在落实食品安全工作责任中有下列情形之一的,应当按照有关规定进行问责: (一)未履行本规定职责和要求,或者履职不到位的; (二)对本区域内发生的重大食品安全事故,或者社会影响恶劣的食品安全事件负有领导责任的; (三)对本区域内发生的食品安全事故,未及时组织领导有关部门有效处置,造成不良影响或者较大损失的; (四)对隐瞒、谎报、缓报食品安全事故负有领导责任的; (五)违规插手、干预食品安全事故依法处理和食品安全违法犯罪案件处理的; (六)有其他应当问责情形的。 第十八条 地方党政领导干部有本规定第十七条所列情形的,按照干部管理权限依规依纪依法进行问责。涉嫌职务违法犯罪的,由监察机关依法调查处置。 第十九条 地方党政领导干部及时报告失职行为并主动采取补救措施,有效预防或者减少食品安全事故重大损失、挽回社会严重不良影响,或者积极配合问责调查,并主动承担责任的,按照有关规定从轻、减轻追究责任。对工作不力导致重大或者特别重大食品安全事故,或者造成严重不良影响的,应当从重追究责任。 第五章 附则 第二十条 乡镇(街道)党政领导干部,各类开发区管理机构党政领导干部,参照本规定执行。 第二十一条 本规定由市场监管总局会同农业农村部解释。 第二十二条 本规定自2019年2月5日起施行。
2019-03-04
The Second Session of the 13th CPPCC National Committee Opens in Beijing
Gather consensus to write the era chapter, and discuss the country is the same painting revival grand plan. The second meeting of the 13th National Committee of the Chinese People's Political Consultative Conference opened in the Great Hall of the People on the afternoon of the 3rd. In the next 10 days, more than 2000 members of the CPPCC National Committee will conscientiously perform their duties, extensively concentrate their efforts, strengthen their mission, and make new and greater contributions to the decisive victory of building a moderately prosperous society in an all-round way and winning the great victory of socialism with Chinese characteristics in the new era. Beijing in March, Spring and Jingming. The dome of the Great Hall of the People was brightly lit, and the atmosphere was solemn and warm. The emblem of the Chinese People's Political Consultative Conference is hung in the middle of the rostrum on ten sides.
Xiang Jingyu: Unyielding? Absolutely loyal
On the top of the Guishan Mountain at the confluence of the Yangtze River and the Han River, the trees are gray and quiet. The loyal bones of Xiang Jingyu are buried here, and the solemn tombstone is the "Tomb of Xiang Jingyu Martyrs" written by Deng Xiaoping ". Xiang Jingyu is the only female founder of the Communist Party of China, a proletarian revolutionist and one of the leaders of the women's liberation movement. In the harsh revolutionary struggle, she used her life to interpret her absolute loyalty to the cause of the party. In July 1927, Wang Jingwei launched the "July 15" counter-revolutionary coup. The three towns of Wuhan fell into white terror, and the revolutionary situation became even more sinister. In November, the Hubei Provincial Party Committee was mainly negative
Zhizhi Technology Releases Orthopedic Medical Special Electron Beam Metal 3D Printer QBEAM Med200
On February 22, 2019, Tianjin Qingyan Zhibeam Technology Co., Ltd. (hereinafter referred to as "Zhibeam Technology") released its self-developed electron beam metal 3D printer QBEAMMed200 for orthopedic medical treatment at the 2019 Asia Additive Material Manufacturing Exhibition TCT. QbeamMed200 equipment parameters: At present, many medical device companies and orthopedic hospitals at home and abroad choose to use electron beam 3D printing technology to produce standardized and personalized orthopedic implants. Compared with laser metal 3D printing (SLM), electron beam metal 3D printing has obvious advantages in manufacturing capacity and manufacturing cost. Taking the acetabular cup with trabecular bone structure as an example, the manufacturing capacity of electron beam metal 3D printing is about 3 times that of laser metal 3D printing (SLM) in the same effective forming space. Because electron beam metal 3D printing has the characteristics of 3KW energy source, substrate temperature above 700 degrees C and layer-by-layer preheating, so that the implant can be stacked in the printing process and save the time and cost of line cutting and heat treatment after printing. At the same time, compared with the inert gas protection environment of laser metal 3D printing (SLM), the vacuum environment of electron beam metal 3D printing is more beneficial to the oxygen content control of the implant. Taking the acetabular cup with trabecular bone structure as an example, according to the calculation of foreign authoritative institutions, the total manufacturing cost of using electron beam metal 3D printing process from powder raw materials to printing to post-processing to obtain a final acetabular cup product is half of the cost of using laser metal 3D printing (SLM) process to manufacture acetabular cup products. On the basis of the previous generation of QbeamLab-type equipment, the electron gun, powder spreading system, control software and quality monitoring have been optimized and designed by the intelligent beam technology QBEAMMed-type orthopedic medical special electron beam metal 3D printer. 1. A new generation of electron gun using single crystal filament, compared with the traditional tungsten filament with 10 times longer life, the emission of electron beam brightness increased by 10 times. The filament life can reach 800 hours and the minimum beam spot diameter is 150 microns. 2. The two-way powder feeding method is adopted, which is matched with the powder spreading integrity detection and residual powder weight monitoring technology, with higher efficiency and more stable process. 3. The updated printing process control software provides a more friendly operation interface, and increases the production mode, which can automatically complete all processes such as vacuum, printing, and cooling with one key. 4. The quality monitoring is upgraded from the traditional optical camera to the secondary electronic layer-by-layer imaging technology, which makes the monitoring and recording of the printing process clearer and more accurate. The QBEAMMed200 equipment also high quality spherical metal powder and Ti6Al4V process packages, and provides a full range of technical support for the new material 3D printing process required by users in the medical field. The first QBEAMMed200 of Zhibeam Technology will be delivered to a domestic orthopedic hospital, and combined with digital diagnosis and treatment, personalized design and other technologies to provide high-quality medical services for orthopedic patients. Orthopedic digital precision medical technology program for the benefit of people's health, is the value of intellectual beam technology proud pursuit. Zhibeam Technology respects and attaches great importance to intellectual property rights, inherits the research and development achievements of Tsinghua University for more than ten years, independently develops key core technologies such as electron beam wide scanning control, electron beam preheating, element evaporation suppression, online detection, etc., and applies for and obtains authorized invention patents 8 items, more than 10 utility models, and 2 registered software copyrights, breaking through the technical monopoly of foreign companies, A selective electron beam melting equipment and process system with China's independent intellectual property rights has been formed. Source | Smart Beam Technology
2019-03-06
Xi Jinping's Heart Is for Children of Inner Mongolia Grassland: Talking about Ecology and Poverty Alleviation
"Maintain the strategic determination to strengthen the construction of ecological civilization, explore new ways of high-quality development guided by ecological priority and green development, increase ecosystem protection, fight pollution prevention and control, and protect the beautiful scenery of the northern border of the motherland." On March 5, Xi Jinping, General Secretary of the Central Committee of the Communist Party of China, President of the State, and Chairman of the Central Military Commission, emphasized during the deliberations of the Inner Mongolia delegation to the Second Session of the 13th National People's Congress. As a representative of the Inner Mongolia delegation, Xi Jinping has participated in the deliberations of the Inner Mongolia delegation twice in a row. "Solid promotion of high-quality economic development" "solid promotion of poverty alleviation" "solid promotion of national
2019-03-07
The Experience of Cadre Work in Our Army during the Anti-Japanese War
During the Anti-Japanese War, the People's Army inherited and carried forward the fine traditions of the Red Army, always adhered to the principle of the party's management of cadres, established the correct cadre line and cadre policy, the cadre work was fully developed and matured, the cadre team continued to grow, and the overall quality was continuously improved. It has withstood the historical strategic changes and the huge test of the complex and changeable situation, not only provided an organizational guarantee for the victory of the Anti-Japanese War, organisational preparations were also made for the war of liberation. appointing people on their merits is a powerful guarantee for developing and strengthening the contingent of cadres. In September 1938, Mao Zedong pointed out at the Sixth Plenary Session of the Sixth Central Committee of the Party: "In this question of using cadres
2019-03-08
Dongli District Party Secretary Xia Xin and his party visit to Tsinghua University
2月28日,东丽区委书记夏新,副区长李光华,区工信局局长边仕苓,华明街道党委副书记、街道办事处主任、华明高新区管委会主任林成涛及区人才办、区科技局、团区委、华明高新区相关同志赴清华大学,拜访清华大学党委书记陈旭,副校长、工程院院士尤政,校党委副书记向波涛,科学院院士、机械工程学院院长雒建斌等。 夏新书记与陈旭书记会谈 夏新书记与清华大学党委书记陈旭亲切会见,就进一步加强科技成果转化平台建设、持续开展人才合作、发挥各自优势支持学校重点学科发展等方面交换了意见。在校地合作工作座谈会上与副校长尤政就五年来东丽区与清华大学在校地合作方面的成果进行总结,并对未来五年深化合作的计划进行了交流。 在清华大学丙所会议室召开校地合作工作座谈会 五年来清华大学与东丽区的校地合作取得了丰硕的成果,清华大学天津高端装备研究院(简称“高端院”)的成长与发展正是校地合作、深耕细作的典型呈现。高端院平台搭建了“科技、产业、金融”高度融合的“握手区”,在高端装备制造领域深度整合资源,现已聚焦涵盖高端装备、智能制造、减摩降耗、轨道交通、医药装备等领域的35个研究所,与企业共建成立6个联合研究中心、8个研究室,成立产业化公司15家。在机器人自动化喷涂与装配领域、3D打印领域、表界面微纳技术领域、测试装备领域、摩擦润滑领域以及汽车液电缓速器研发制造等诸多技术领域均取得突破,大力推动了科技成果转化进程。 作为清华大学的派出院,高端院注重人才的聚集及培养,致力打造国际化的机械行业高端人才汇聚和培养基地,拥有院士、长江学者、国家杰出青年、国务院特贴专家等多种国家级领军人才。同时,清华大学智能装备设计与制造全日制工程硕士项目、清华大学高端装备跨专业实践项目、中国机械行业卓越工程师实训基地等项目的引进落地都切实起到了人才汇聚的平台作用。 高端院科研平台建设工作稳步提升,建院至今签订横向合同180项,申请获批国家级重大专项30余项,申请有效专利近170项。特别是院士专家工作站、天津市专家服务基地、天津市技术转移示范机构、天津市产业技术研究院、超性能表面制造国家地方联合工程研究中心等平台中心的相继获批为高端院未来科研工作蓬勃开展提供了有力支撑。 夏新书记参观机械工程系生物制造与快速成形技术 高端院的发展离不开清华大学与东丽区政府的长期支持与关怀,此次会面,双方对过去五年的成果表示肯定,并对未来五年深化校地合作充满信心。 夏新书记表示,东丽区在京津冀协同发展这个重大历史机遇下,以科技创新为引领,与清华大学携手开启了校地合作的崭新篇章,五年来机械工程系、电子工程系、汽车工程系、精密仪器系的院士、专家和一大批中青年科技骨干到东丽干事创业,为东丽的科技强区做出了重大贡献。五年间,东丽区与清华大学在人才交流、创新创业、社会实践等多方面开展了深入合作,为东丽的干部队伍注入了新鲜的血液。希望双方凝心聚力,在搭建创新要素集合和产业成果转化上实现更大发展。 夏新书记、尤政副校长等在清华大学合影留念 尤政副校长表示,清华大学主动融入京津冀协同发展是清华历史使命的要求,感谢东丽区一直以来对清华工作的支持,五年来清华大学和东丽区合作紧密,交流频繁,清华大学一直坚持通过技术原始创新,为中国经济发展做更大贡献,校地合作的初衷就是要把先进的技术理念和科技创新成果融入地方政府大局,希望双方在技术工程化、企业孵化、国际合作、人才和项目引进等方面探索更多形式的合作,推动校地合作再上新台阶。 清华大学技术源头创新的种子在东丽区科技的土壤中生根发芽、茁壮成长,高端院在清华大学与东丽区校地合作的坚实推动下创新引领、扬帆前行。未来五年,高端院将在技术平台建设、科技成果转化、产业对接、科技金融服务等方面实现更大突破。京津冀协同发展是国家发展的重大战略部署,未来高端院也将继续承载京津冀协同发展的重要使命,承接北京外溢的科技资源和人才资源,带动河北省科技、产业协同发展,充分利用天津“一基地三区”的定位优势,服务天津经济建设、推动天津高质量持续发展。 院务部企宣办报道文/王肖