搜索历史清除全部记录
最多显示8条历史搜索记录噢~
All
  • All
  • News

2017-11-01

"2017 Seminar on Oil Monitoring and Application of High-end Equipment" Successfully Held in Tianjin

On October 26-27, 2017, the 2017 "Symposium on Oil Monitoring and Application of High-end Equipment" sponsored by the Oil Monitoring Technology Committee of the Tribology Branch of the China Mechanical Engineering Society, supported by the State Key Laboratory of Tribology of Tsinghua University and Tianjin High-end Equipment Research Institute of Tsinghua University, co-sponsored by Wuhan University of Technology and hosted by Qingyan Testing (Tianjin) Co., Ltd. was successfully held in Tianjin. Academician of Chinese Academy of Sciences, Dean of School of Mechanical Engineering of Tsinghua University, Dean of Tianjin High-end Equipment Research Institute of Tsinghua University Luo Jianbin, Vice Chairman of Tribology Branch of Chinese Mechanical Engineering Society, Yan Xinping of Wuhan University of Technology, Vice President of Tianjin High-end Equipment Research Institute of Tsinghua University Zhang Xiangjun, Chairman of National Oil Monitoring Technical Committee and other members, as well as nearly 120 experts and scholars from universities, research institutions, enterprises and institutions and the military engaged in oil monitoring research and application attended the meeting. The opening ceremony of the conference was presided over by Liu Dongfeng, chief engineer of Qingdao oil detection and analysis center of Naval University of engineering. At the meeting, Luo Jianbin, Yan Xinping and Zhang Xiangjun delivered opening speeches respectively. First of all, Academician Luo Jianbin extended a warm welcome to the participants and proposed that under the general situation of the rapid development of intelligent manufacturing and intelligent equipment, oil monitoring has ushered in a rare development opportunity, and mastering the operating status of equipment is the realization of intelligence. basis. Subsequently, Yan Xinping introduced the development process of oil monitoring, and made a professional judgment and analysis on the future development direction. Academician Luo Jianbin, Professor Yan Xinping and Professor Zhang Xiangjun addressed the conference. During the seminar, 15 experts and scholars, including Liu Dongfeng, chief engineer of Qingdao Oil Detection and Analysis Center of Naval University of Engineering and Liu Rende, senior engineer of Hangzhou Xingang Lubrication Technology Co., Ltd., made wonderful reports, introducing the research results and technological development of oil monitoring in different fields, which resonated with the experts and scholars attending the conference and had active on-site interaction, strong academic atmosphere. At the seminar, the participants listened carefully to the report of the conference and actively interacted with each other. After the report of the conference, the participants went to Tianjin High-end Equipment Research Institute of Tsinghua University (hereinafter referred to as "High-end Institute") to visit and exchange. In the publicity exhibition hall, Zhang Xiangjun, vice president of the High-end Institute, introduced the history, organizational structure, operation mode and scientific research achievements of the Institute in detail to the guests, in the subsequent visit to the lubrication and friction testing center laboratory, the laboratory's testing capabilities and equipment were introduced one by one, as well as the self-developed intelligent oil online monitoring and distribution system, gear wear life test bench, etc., which aroused the broad interest of scholars and experts, and representatives of all parties expressed positive affirmation of the development achievements of our hospital. Professor Zhang Xiangjun introduced the general situation of the high-end institute and the intelligent lubrication system of the testing center to the delegates. The 2-day conference summarized the research results in various fields of oil monitoring for high-end equipment. With the help of the conference, experts, scholars, enterprise representatives and scientific researchers exchanged their experiences, learned from each other, and jointly committed themselves to the construction and sustainable development of the oil monitoring industry. As an important part of industrial safety operation and maintenance, oil monitoring can improve the operation safety and stability of large-scale industrial equipment, ensure safe production, and promote energy conservation and emission reduction. With the application and promotion of oil monitoring research results in the field of high-end equipment, it will further improve the ease of use and reliability of equipment, and provide assistance for the development of large-scale high-end equipment. Lubrication and Friction Testing Center Report/Ji Jinxiu/Gao Jianhua

MORE

2017-11-03

Decision of the Central Committee of the Communist Party of China on Seriously Studying, Propagating and Implementing the Spirit of the 19th National Congress of the Communist Party of China

为深入学习宣传贯彻党的十九大精神,把全党全国各族人民的思想统一到党的十九大精神上来,把力量凝聚到党的十九大确定的各项任务上来,作出如下决定。   一、充分认识学习宣传贯彻党的十九大精神的重大意义   中国共产党第十九次全国代表大会于10月18日至24日在北京举行。这是在全面建成小康社会决胜阶段、中国特色社会主义进入新时代的关键时期召开的一次十分重要的大会。大会高举中国特色社会主义伟大旗帜,以马克思列宁主义、毛泽东思想、邓小平理论、“三个代表”重要思想、科学发展观、习近平新时代中国特色社会主义思想为指导,分析了国际国内形势发展变化,回顾和总结了过去5年的工作和历史性变革,作出了中国特色社会主义进入了新时代、我国社会主要矛盾已经转化为人民日益增长的美好生活需要和不平衡不充分的发展之间的矛盾等重大政治论断,深刻阐述了新时代中国共产党的历史使命,确立了习近平新时代中国特色社会主义思想的历史地位,提出了新时代坚持和发展中国特色社会主义的基本方略,确定了决胜全面建成小康社会、开启全面建设社会主义现代化国家新征程的目标,对新时代推进中国特色社会主义伟大事业和党的建设新的伟大工程作出了全面部署。大会批准了习近平同志代表十八届中央委员会所作的《决胜全面建成小康社会夺取新时代中国特色社会主义伟大胜利》的报告,批准了中央纪律检查委员会的工作报告,审议通过了《中国共产党章程(修正案)》,选举产生了新一届中央委员会和中央纪律检查委员会。   习近平同志的报告,深刻回答了新时代坚持和发展中国特色社会主义的一系列重大理论和实践问题,描绘了决胜全面建成小康社会、夺取新时代中国特色社会主义伟大胜利的宏伟蓝图,进一步指明了党和国家事业的前进方向,是全党全国各族人民智慧的结晶,是我们党团结带领全国各族人民在新时代坚持和发展中国特色社会主义的政治宣言和行动纲领,是马克思主义的纲领性文献。《中国共产党章程(修正案)》将习近平新时代中国特色社会主义思想写入党章,确立为我们党必须长期坚持的指导思想。修改后的党章充分体现了党的十八大以来党的理论创新、实践创新、制度创新成果,充分体现了党的十九大报告确立的重大理论观点和重大战略思想,对推进党的事业和党的建设必将更好发挥规范和指导作用。   党的十九届一中全会选举产生了以习近平同志为核心的新一届中央领导集体,一批经验丰富、德才兼备、奋发有为的同志进入中央领导机构,充分显示出中国特色社会主义事业蓬勃兴旺、充满活力。   认真学习宣传贯彻党的十九大精神,事关党和国家工作全局,事关中国特色社会主义事业长远发展,事关最广大人民根本利益,对于动员全党全国各族人民更加紧密地团结在以习近平同志为核心的党中央周围,高举中国特色社会主义伟大旗帜,坚定道路自信、理论自信、制度自信、文化自信,为实现推进现代化建设、完成祖国统一、维护世界和平与促进共同发展三大历史任务,为决胜全面建成小康社会、夺取新时代中国特色社会主义伟大胜利、实现中华民族伟大复兴的中国梦、实现人民对美好生活的向往继续奋斗,具有重大现实意义和深远历史意义。   二、全面准确学习领会党的十九大精神   学习领会党的十九大精神,必须坚持全面准确,坚持读原著、学原文、悟原理,做到学深悟透。要认真研读党的十九大报告和党章,学习习近平总书记在党的十九届一中全会上的重要讲话精神,着重把握以下几个方面。   1.深刻领会党的十九大的主题。不忘初心,牢记使命,高举中国特色社会主义伟大旗帜,决胜全面建成小康社会,夺取新时代中国特色社会主义伟大胜利,为实现中华民族伟大复兴的中国梦不懈奋斗。这是党的十九大的主题,明确回答了我们党在新时代举什么旗、走什么路、以什么样的精神状态、担负什么样的历史使命、实现什么样的奋斗目标的重大问题。中国共产党人的初心和使命,就是为中国人民谋幸福,为中华民族谋复兴。这个初心和使命是激励中国共产党人不断前进的根本动力。中国特色社会主义是改革开放以来党的全部理论和实践的主题,在未来的征程上,要高举中国特色社会主义伟大旗帜,更加自觉地增强道路自信、理论自信、制度自信、文化自信,确保党和国家事业始终沿着正确方向胜利前进。决胜全面建成小康社会是到2020年必须完成的奋斗目标,要举全党全国之力,为实现第一个百年奋斗目标而奋斗。全面建成小康社会是党和国家事业发展的一个阶段性目标,这个目标实现后,我们要在新的历史起点上夺取新时代中国特色社会主义伟大胜利,为实现中华民族伟大复兴的中国梦不懈奋斗。   2.深刻领会习近平新时代中国特色社会主义思想的历史地位和丰富内涵。党的十八大以来,以习近平同志为核心的党中央,坚持解放思想、实事求是、与时俱进、求真务实,坚持辩证唯物主义和历史唯物主义,紧密结合新的时代条件和实践要求,以全新的视野深化对共产党执政规律、社会主义建设规律、人类社会发展规律的认识,进行艰辛理论探索,取得重大理论创新成果,创立了习近平新时代中国特色社会主义思想。习近平新时代中国特色社会主义思想,是对马克思列宁主义、毛泽东思想、邓小平理论、“三个代表”重要思想、科学发展观的继承和发展,是马克思主义中国化最新成果,是党和人民实践经验和集体智慧的结晶,是中国特色社会主义理论体系的重要组成部分,是全党全国人民为实现中华民族伟大复兴而奋斗的行动指南,必须长期坚持并不断发展。习近平新时代中国特色社会主义思想,从理论和实践结合上系统回答了新时代坚持和发展什么样的中国特色社会主义、怎样坚持和发展中国特色社会主义这个重大时代课题,回答了新时代坚持和发展中国特色社会主义的总目标、总任务、总体布局、战略布局和发展方向、发展方式、发展动力、战略步骤、外部条件、政治保证等基本问题,并且根据新的实践对经济、政治、法治、科技、文化、教育、民生、民族、宗教、社会、生态文明、国家安全、国防和军队、“一国两制”和祖国统一、统一战线、外交、党的建设等各方面作出理论分析和政策指导。党的十九大报告用“8个明确”概括了这一思想的主要内容。为贯彻落实习近平新时代中国特色社会主义思想,党的十九大报告提出新时代坚持和发展中国特色社会主义的基本方略,并概括为“14个坚持”。习近平新时代中国特色社会主义思想,是指导思想层面的表述,在行动纲领层面称之为中国特色社会主义基本方略。要全面贯彻党的基本理论、基本路线、基本方略,更好引领党和人民事业发展。   3.深刻领会党的十八大以来党和国家事业发生的历史性变革。党的十八大以来的5年,是党和国家发展进程中极不平凡的5年。5年来,以习近平同志为核心的党中央科学把握当今世界和当代中国发展大势,顺应实践要求和人民愿望,举旗定向、运筹帷幄,统揽伟大斗争、伟大工程、伟大事业、伟大梦想,统筹推进“五位一体”总体布局、协调推进“四个全面”战略布局,以巨大的政治勇气和强烈的责任担当,提出一系列新理念新思想新战略,出台一系列重大方针政策,推出一系列重大举措,推进一系列重大工作,解决了许多长期想解决而没有解决的难题,办成了许多过去想办而没有办成的大事,推动党和国家事业发生历史性变革。5年来的成就是全方位的、开创性的,5年来的变革是深层次的、根本性的。这些历史性变革,对党和国家事业发展具有重大而深远的影响。   4.深刻领会中国特色社会主义进入了新时代。经过长期努力,中国特色社会主义进入了新时代,这是我国发展新的历史方位。这个新时代,是承前启后、继往开来、在新的历史条件下继续夺取中国特色社会主义伟大胜利的时代,是决胜全面建成小康社会、进而全面建设社会主义现代化强国的时代,是全国各族人民团结奋斗、不断创造美好生活、逐步实现全体人民共同富裕的时代,是全体中华儿女勠力同心、奋力实现中华民族伟大复兴中国梦的时代,是我国日益走近世界舞台中央、不断为人类作出更大贡献的时代。中国特色社会主义进入新时代,在中华人民共和国发展史上、中华民族发展史上具有重大意义,在世界社会主义发展史上、人类社会发展史上也具有重大意义。这意味着近代以来久经磨难的中华民族迎来了从站起来、富起来到强起来的伟大飞跃,迎来了实现中华民族伟大复兴的光明前景;意味着科学社会主义在21世纪的中国焕发出强大生机活力,在世界上高高举起了中国特色社会主义伟大旗帜;意味着中国特色社会主义道路、理论、制度、文化不断发展,拓展了发展中国家走向现代化的途径,给世界上那些既希望加快发展又希望保持自身独立性的国家和民族提供了全新选择,为解决人类问题贡献了中国智慧和中国方案。   5.深刻领会我国社会主要矛盾的变化。中国特色社会主义进入新时代,我国社会主要矛盾已经转化为人民日益增长的美好生活需要和不平衡不充分的发展之间的矛盾。我国稳定解决了十几亿人的温饱问题,总体上实现小康,不久将全面建成小康社会,人民美好生活需要日益广泛,不仅对物质文化生活提出了更高要求,而且在民主、法治、公平、正义、安全、环境等方面的要求日益增长。同时,我国社会生产力水平总体上显著提高,社会生产能力在很多方面进入世界前列,更加突出的问题是发展不平衡不充分,这已经成为满足人民日益增长的美好生活需要的主要制约因素。我国社会主要矛盾的变化是关系全局的历史性变化,对党和国家工作提出了许多新要求。要在继续推动发展的基础上,着力解决好发展不平衡不充分问题,大力提升发展质量和效益,更好满足人民在经济、政治、文化、社会、生态等方面日益增长的需要,更好推动人的全面发展、社会全面进步。我国社会主要矛盾的变化,没有改变我们对我国社会主义所处历史阶段的判断,我国仍处于并将长期处于社会主义初级阶段的基本国情没有变,我国是世界最大发展中国家的国际地位没有变。我们要牢牢把握社会主义初级阶段这个基本国情,牢牢立足社会主义初级阶段这个最大实际,牢牢坚持党的基本路线这个党和国家的生命线、人民的幸福线。   6.深刻领会新时代中国共产党的历史使命。实现中华民族伟大复兴是近代以来中华民族最伟大的梦想。中国共产党一经成立,就把实现共产主义作为党的最高理想和最终目标,义无反顾肩负起实现中华民族伟大复兴的历史使命,团结带领人民进行了艰苦卓绝的斗争,谱写了气吞山河的壮丽史诗。今天,我们比历史上任何时期都更接近、更有信心和能力实现中华民族伟大复兴的目标。行百里者半九十。中华民族伟大复兴,绝不是轻轻松松、敲锣打鼓就能实现的,必须准备付出更为艰巨、更为艰苦的努力。实现伟大梦想,必须进行伟大斗争。这个伟大斗争就是具有许多新的历史特点的伟大斗争。要充分认识这场伟大斗争的长期性、复杂性、艰巨性,发扬斗争精神,提高斗争本领,不断夺取伟大斗争新胜利。实现伟大梦想,必须建设伟大工程。这个伟大工程就是我们党正在深入推进的党的建设新的伟大工程。要不断增强党的政治领导力、思想引领力、群众组织力、社会号召力,确保我们党永葆旺盛生命力和强大战斗力。实现伟大梦想,必须推进伟大事业。这个伟大事业就是中国特色社会主义伟大事业。要更加自觉地增强“四个自信”,既不走封闭僵化的老路,也不走改旗易帜的邪路,始终坚持和发展中国特色社会主义。伟大斗争,伟大工程,伟大事业,伟大梦想,紧密联系、相互贯通、相互作用,其中起决定性作用的是党的建设新的伟大工程。建设伟大工程,要结合伟大斗争、伟大事业、伟大梦想的实践来进行,确保党始终走在时代前列、始终成为全国人民的主心骨、始终成为坚强领导核心。   7.深刻领会实现第一个百年奋斗目标和向第二个百年奋斗目标进军。改革开放之后,我们党对我国社会主义现代化建设作出战略安排,提出“三步走”战略目标和“两个一百年”奋斗目标。从现在到2020年,是全面建成小康社会决胜期。要按照全面建成小康社会各项要求,紧扣我国社会主要矛盾变化,突出抓重点、补短板、强弱项,特别是要坚决打好防范化解重大风险、精准脱贫、污染防治的攻坚战,使全面建成小康社会得到人民认可、经得起历史检验。党的十九大对第二个百年奋斗目标进行了战略规划,将全面建设社会主义现代化国家的新征程分为两个阶段来安排。第一个阶段,从2020年到2035年,在全面建成小康社会的基础上,再奋斗15年,基本实现社会主义现代化。第二个阶段,从2035年到本世纪中叶,在基本实现现代化的基础上,再奋斗15年,把我国建成富强民主文明和谐美丽

MORE

2017-11-03

Embark on a new journey, practice new ideas, and inherit new forces-Shang Binyi, representative of the 19th National Congress of the Communist Party of China and Secretary of the Dongli District Party Committee, went deep into our hospital to preach the spirit of the 19th National Congress of the Party

前言    中国共产党第十九次全国代表大会(简称“十九大”)于2017年10月18日至10月24日在北京成功召开。会上,习近平代表第十八届中央委员会向大会作了题为《决胜全面建成小康社会夺取新时代中国特色社会主义伟大胜利》的报告。会后,十九大代表、东丽区委书记尚斌义在全区掀起了广泛的十九大精神宣讲活动。日前,尚斌义深入清华大学天津高端装备研究院(简称“高端院”)开展了一次精彩生动的十九大宣讲会,传达会议重要内容、分享报告深刻体会,鼓励高端院青年为建设社会主义现代化强国做出贡献。      2017年11月1日,十九大代表、东丽区委书记尚斌义深入清华大学天津高端装备研究院,了解了高端院全体职工学习党的十九大精神情况,并与党员和职工代表进行座谈,宣讲十九大精神。高端院副院长张向军、党支部支委成员、高端院党员职工代表等共计70余人参加了此次专题活动,陪同参加宣讲的还有区委常委、区委办公室主任刘克强,东丽湖党工委书记陶玉珍,区委办、组织部、宣传部等相关负责同志。      尚斌义宣讲十九大精神    首先,尚斌义详细了解了高端院党支部各方面的建设情况及全院学习十九大精神的情况。张向军表示,党的十九大召开是党和国家的大事件,在党和国家事业发展史上具有重大意义,习总书记的报告让同志们备受鼓舞。斌义书记作为十九大代表,亲临高端院宣讲十九大精神,更是令大家倍感亲切。      张向军介绍高端院党务建设工作及十九大学习情况        尚斌义表示,高端院作为京津冀协同发展战略背景下成立的市、校战略合作典范,对天津市、东丽区在高端装备制造领域的全方位推动作用是积极显著的。同时指出,党的十九大是在全面建成小康社会决胜阶段、中国特色社会主义进入新时代关键时期召开的一次十分重要的大会,外媒的评论也指出——这是中国重塑世界的一次大会。习近平总书记所作的十九大报告旗帜鲜明、内容全面,总结了我国“过去五年的工作和历史性变革”、明确了“新时代中国共产党的历史使命”、提出了“新时代中国特色社会主义思想和基本方略”等内容,报告深刻解读了党和国家长远发展面临的实践问题,也明确指出了党和人民前进发展时下一步的行动纲领,意义十分的重大。    宣讲会现场        随后,尚斌义以十九大报告精神为基础,结合高端院实际,从三个方面提出期望:        一、认真贯彻学习十九大精神,将精神学习转化为行动方向    现阶段,中国对世界的影响已经占据主导,历史证明,中国特色社会主义的道路是成功的,中国正在日益走进世界舞台中央。十九大的意义重大,精神深刻,我们了解了党和国家的两个重大变化:中国特色社会主义已进入了新时代、社会主要矛盾发生变化;同时也有两个没有变:我国基本国情没有变、仍然并将长期处于社会主义初级阶段;我国是世界最大发展中国家的国际地位没有变,我党在快速发展中时刻保持成熟清醒。      十九大报告是我国下一个五年发展的行动指南,提出了一系列重大的思想、决策,也是我们党员群众的教科书,我们要紧密联系党和国家的发展需要,以制定工作规划的态度来领略报告中的政治目标,继续统筹推进“五位一体”总体布局,协调推进“四个全面”战略布局,并制定阶段目标,让党的十九大精神在东丽大地落地生根、开花结果。在改革开放四十周年的2018年、我国建国七十周年的2019年、建党一百周年的2021年,我们要在党中央的领导下完成一个个的阶段目标,同步加快建设东丽区,推进经济和城市两个转型发展。        二、加快建设创新型国家,全面提升科技、经济、文化实力    十九大报告提出的新时代中国特色社会主义思想具有科学性、实践性和发展性,要把我国建设成为创新型国家,需要继续提升科技实力、经济实力、文化软实力等。      科学技术作为第一生产力,是经济和社会发展的首要推动力量。十九大提出的伟大梦想、伟大斗争、伟大工程、伟大事业都要以全面提升各行各业的发明创造力、综合生产力为支撑。高端院是在此形式背景下,在京津冀协同发展的战略目标中应运而生的。三年来,清华高端院以高素质人才团队、多领域研究方向,积极搭建起“清华科技、服务社会”的研发转化平台,并成功地将技术产品应用在产业升级和军民融合等领域,未来也要继续推进学科交叉、科技创新,并不断开拓市场化支持新渠道,真正践行十九大关于“贯彻新发展理念,建设现代化经济体系”的要求。      三、青年团队要爱岗敬业发愤图强,担当筑梦强国的责任      十九大报告指出,青年兴则国家兴,青年强则国家强,青年一代要有理想、有本领、有担当,中华民族伟大复兴的中国梦终将在一代代青年的接力奋斗中变为现实。      十九大的报告涉及方方面面,利益至高至远,涵盖信仰目标。高端院拥有很多年轻的团队,很多员工都是刚走出学校步入社会,青年团队更要深刻认真的学习党的十九大报告,坚定理想信念,志存高远,脚踏实地,认知中国历史、中华民族,进一步认知世界,在实现中国梦的生动实践中放飞青春梦想,担当起中华民族伟大复兴的重任。      尚斌义强调,实现梦想的征程道阻且长,我们要坚持中国共产党的领导,积极稳妥的推进中国政治改革。我们每名党员、每位公民不论是本职工作上的科技研发、产业金融、技术服务,还是日常生活上的自我约束、素养提高、道德规范,都要把党和国家的根本利益作为践行标准,担当责任。为天地立心,为生民立命,为望圣力绝学,为万世开太平,为实现我国建成社会主义现代化国家的共同目标做出共同的努力。        尚斌义书记的宣讲赢得现场热烈掌声,大家精神振奋、受益匪浅。        张向军结合宣讲内容及十九大精神,总结梳理高端院未来的发展目标。她表示,清华大学天津高端装备研究院会立即部署相关工作,将文件精神形成工作规划,同时我院全体员工定当全力接棒清华人舍我其谁的奉献精神,发挥专业外派院的平台效应,努力提升科研水平、深入拓展产业服务、大力辐射行业发展,并以十九大的精神为指引助力东丽区早日建设成为科技强区、都市新区、文明城区。在踏上新征程,践行新思想,传承新力量的道路上,继续加大人才培养、壮大青年力量,让更多的青年人才站在国家的栋梁位置上。        会上,来自不同工作岗位的高端院员工积极与尚斌义书记交流互动,大家表示定不负领导的殷切期望,从我做起、脚踏实地,用实际行动为推进新时代中国特色社会主义伟大事业贡献力量。    现场互动    院务部企宣办报道文/赵娜图/孙健豪

MORE

2017-11-07

Our national key research and development plan "manufacturing ultraviolet laser" special sub-topic officially launched

On October 22, 2017, the implementation plan of the 2017 national key research and development plan "UV laser for manufacturing", led by Tsinghua University and jointly declared by Tianjin High-end Equipment Research Institute of Tsinghua University, passed the demonstration, marking the official launch of the project and entering the implementation stage. The project is headed by Liu Qiang, a professor at Tsinghua University and director of the Laser Engineering Research Institute of Tianjin High-end equipment Research Institute of Tsinghua University, with a total funding of nearly 30 million yuan. The project integrates the domestic UV laser from materials, devices to the whole machine industrialization and application of the whole chain advantage units, by Tsinghua University, Tsinghua University Tianjin High-end equipment Research Institute and other units to jointly undertake, laser engineering research institute will participate in the project high power high repetition rate 355nm UV laser key technology research and high power UV crystal anti-damage technology and industrialization two topics research work. The project aims to meet the needs of additive manufacturing and laser manufacturing, and to carry out research on the generation of high-power and high-frequency 355nm/266nm ultraviolet laser, the improvement of the performance of ultraviolet nonlinear optical crystals, the industrialization of high-power ultraviolet laser and the application demonstration of ultraviolet laser for manufacturing, so as to realize the productization of high-performance ultraviolet laser for industrial use. Laser Engineering Research Institute Report Text/Han Lixuan Map/Yan Xingpeng

MORE

2017-11-07

Tsinghua more than 100 mechanical students practice walking into our hospital

On the afternoon of October 28, the School of Mechanical Engineering of Tsinghua University organized students to visit and study at Tsinghua University Tianjin High-end Equipment Research Institute (referred to as "High-end Institute"), Huaming Machine Tool Museum, and CRRC Tangche Rail Vehicle Co., Ltd. More than 140 students majoring in machinery, aviation and power participated in this activity. This visit and learning activity was initiated by the Department of Mechanical Engineering of Tsinghua University and co-organized by the High-end Institute. It is the practical part of the "Introduction to Mechanical Science and Technology" course. It aims to enable students to better grasp the current situation of advanced manufacturing and understand the needs of social development. Practice consolidates theoretical knowledge. Introduction of Operation Mode and Talent Training Mode of High-end Institute During the visit to the exhibition hall, Tsinghua Students' Practice Group first had a detailed understanding of the construction process, organizational structure and operation mode of our institute. In the technical achievement exhibition area, the robot and automation equipment engineering research institute, the additive manufacturing technology and engineering research institute, the advanced energy equipment technology research institute, the lubrication technology research institute, the lubrication and friction testing center, the wheel-rail relationship and maintenance research center and other research institute leaders gave an in-depth explanation on the core technology and market transformation of the team. After the visit of the scientific research team to introduce the technical achievements of the high-end institute, all teachers and students visited the Huaming Machine Tool Museum and the factory production line of CRRC Tangche Group together, learned about the development history of machine tools, and inspected the operation and maintenance of industrial production lines on the spot. The students who participated in this practical activity said that although the visit was only half a day, they had gained a lot and benefited a lot. In addition to having a practical and sensory understanding of the advanced manufacturing industry, they also saw the strict and exquisite management of modern enterprises from the details such as operation mode and team atmosphere. At the same time, the high selection standard of compound talents for enterprises also positions themselves in the direction that needs to be strengthened and worked hard in schools. Photo by Research Department Report/Yu Yantu/Zhao Na Liu Xiaohong

MORE

2017-11-09

Our school's wheel rail center project achieved excellent results in the rematch of Tsinghua Station in China Urban Rail Transit Science and Technology Innovation and Entrepreneurship Competition

From November 3rd to 4th, the Wheel-Rail Relationship and Maintenance Research Center of the High-end Equipment Research Institute of Tsinghua University participated in the second round of the first China Urban Rail Transit Technology Innovation and Entrepreneurship Competition Shenzhen Tsinghua Station. The two projects of "Wheel Dynamic Real-time Monitoring System Research" and "Rail Beautician" respectively won the second prize in the basic theory research category and the third prize in the promotion application category, among them, the "Research on Wheel Dynamic Real-time Monitoring System" project will represent Tsinghua Station to participate in the national finals in Beijing in December. Ding Minghui, the representative of the wheel and rail center, explained the participating projects. China's high-speed rail and urban rail transit have achieved rapid development in recent years, and operational safety and comfort have been paid more and more attention. The wheel-rail relationship problems caused by defects such as the radial deviation of the wheel tread will damage the vehicle track structure, cause vibration and noise, and affect the safety of operation. The research project of wheel dynamic real-time monitoring system in the wheel-rail center is based on academician Zhai Wanming's vehicle-track coupling dynamics theory system, railway large system dynamics theory and high-speed train system dynamics theory. Through the developed real-time detection system of wheel dynamic characteristics, the wheel-rail force between the wheel and the track of the vehicle passing through the test track is accurately measured in real time, and the wheel state is identified under the running state of the vehicle, identification and early warning of possible faults can effectively improve maintenance efficiency, ensure operational safety, and improve the operation and maintenance status of rail transit wheels. Through the research and promotion of this project, the wheel mileage of high-speed trains can be increased by at least 25%, resulting in good economic benefits. This competition is guided by the China Association for Science and Technology, the High-tech Research and Development Center of the Ministry of Science and Technology, the China Civil Engineering Society, and the China Science and Technology Industrialization Promotion Association. It is organized by Beijing Urban Construction Design and Development Group Co., Ltd., Beijing Jiaotong University, Tsinghua University, Tongji University, Southwest Jiaotong University and other units. The competition has four sub-competition areas: North China, East China, South China, and West. The Tsinghua Station rematch was held at Tsinghua Shenzhen Graduate School on the 4th, and the rematch award ceremony was held that night. Ji Shishan, Dean of the Research Institute of Tsinghua University in Shenzhen, Jian Lian, Deputy General Manager of Shenzhen Metro Group, Feng Aijun, Deputy Chief Engineer of Beijing Urban Construction Design and Development Group, Wang Xiaohao, Deputy Dean of Shenzhen Graduate School of Tsinghua University, and other leading guests attended the award ceremony and presented awards to the winners. Ji Shishan, President of Shenzhen Tsinghua Research Institute, delivered a speech. Participants took a photo of the Research Center for Wheel-Rail Relations and Maintenance. Report by Cui Diqiang and Lu Yajin

MORE

2017-11-10

The 19th National Congress made major changes to the Party Constitution.

2017年10月24日  中国共产党第十九次全国代表大会审议并一致通过十八届中央委员会提出的《中国共产党章程(修正案)》,决定这一修正案自通过之日起生效。党章进行了哪些修改?哪些新思想、新论断、新概念写入了党章?    1.习近平新时代中国特色社会主义思想写入党章  大会一致同意,在党章中把习近平新时代中国特色社会主义思想同马克思列宁主义、毛泽东思想、邓小平理论、"三个代表"重要思想、科学发展观一道确立为党的行动指南。大会要求全党以习近平新时代中国特色社会主义思想统一思想和行动,增强学习贯彻的自觉性和坚定性,把习近平新时代中国特色社会主义思想贯彻到社会主义现代化建设全过程、体现到党的建设各方面。   2.中国特色社会主义文化写入党章  大会同意把中国特色社会主义文化同中国特色社会主义道路、中国特色社会主义理论体系、中国特色社会主义制度一道写入党章,这有利于全党深化对中国特色社会主义的认识、全面把握中国特色社会主义内涵。大会强调,全党同志要倍加珍惜、长期坚持和不断发展党历经艰辛开创的这条道路、这个理论体系、这个制度、这个文化,高举中国特色社会主义伟大旗帜,坚定道路自信、理论自信、制度自信、文化自信,贯彻党的基本理论、基本路线、基本方略。   3.实现中华民族伟大复兴的中国梦写入党章  大会认为,实现中华民族伟大复兴是近代以来中华民族最伟大的梦想,是我们党向人民、向历史作出的庄严承诺。大会同意在党章中明确实现"两个一百年"奋斗目标、实现中华民族伟大复兴的中国梦的宏伟目标。   4.党章根据我国社会主要矛盾的转化作出相应修改  大会认为,党的十九大作出的我国社会主要矛盾已经转化为人民日益增长的美好生活需要和不平衡不充分的发展之间的矛盾的重大政治论断,反映了我国社会发展的客观实际,是制定党和国家大政方针、长远战略的重要依据。党章据此作出相应修改,为我们把握我国发展新的历史方位和阶段性特征、更好推进党和国家事业提供了重要指引。   5.推进国家治理体系和治理能力现代化写入党章  把促进国民经济更高质量、更有效率、更加公平、更可持续发展,完善和发展中国特色社会主义制度,推进国家治理体系和治理能力现代化,更加注重改革的系统性、整体性、协同性等内容写入党章,有利于推动全党把思想和行动统一到党中央科学判断和战略部署上来,树立和践行新发展理念,不断开创改革发展新局面。   6.供给侧结构性改革、"绿水青山就是金山银山"写入党章  大会同意把发挥市场在资源配置中的决定性作用,更好发挥政府作用,推进供给侧结构性改革,建设中国特色社会主义法治体系,推进协商民主广泛、多层、制度化发展,培育和践行社会主义核心价值观,推动中华优秀传统文化创造性转化、创新性发展,继承革命文化,发展社会主义先进文化,提高国家文化软实力,牢牢掌握意识形态工作领导权,不断增强人民群众获得感,加强和创新社会治理,坚持总体国家安全观,增强绿水青山就是金山银山的意识等内容写入党章。   7.人类命运共同体、"一带一路"写入党章  大会同意,把中国共产党坚持对人民解放军和其他人民武装力量的绝对领导,贯彻习近平强军思想,坚持政治建军、改革强军、科技兴军、依法治军,建设一支听党指挥、能打胜仗、作风优良的人民军队,切实保证人民解放军有效履行新时代军队使命任务;铸牢中华民族共同体意识;坚持正确义利观,推动构建人类命运共同体,遵循共商共建共享原则,推进"一带一路"建设等内容写入党章。   8.全面从严治党、四个意识写入党章  大会同意,把党的十九大确立的坚持党要管党、全面从严治党,加强党的长期执政能力建设、先进性和纯洁性建设,以党的政治建设为统领,全面推进党的政治建设、思想建设、组织建设、作风建设、纪律建设,把制度建设贯穿其中,深入推进反腐败斗争等要求写入党章,把不断增强自我净化、自我完善、自我革新、自我提高能力,用习近平新时代中国特色社会主义思想统一思想、统一行动,牢固树立政治意识、大局意识、核心意识、看齐意识,坚定维护以习近平同志为核心的党中央权威和集中统一领导,加强和规范党内政治生活,增强党内政治生活的政治性、时代性、原则性、战斗性,发展积极健康的党内政治文化,营造风清气正的良好政治生态等内容写入党章,把坚持从严管党治党作为党的建设必须坚决实现的基本要求之一写入党章。   9."党是领导一切的"写入党章  大会认为,中国共产党的领导是中国特色社会主义最本质的特征,是中国特色社会主义制度的最大优势。党政军民学,东西南北中,党是领导一切的。大会同意把这一重大政治原则写入党章,这有利于增强全党党的意识,实现全党思想上统一、政治上团结、行动上一致,提高党的创造力、凝聚力、战斗力,确保党总揽全局、协调各方,为做好党和国家各项工作提供根本政治保证。   10.实现巡视全覆盖、推进"两学一做"写入党章  大会认为,总结吸收党的十八大以来党的工作和党的建设的成功经验,并同总纲部分修改相衔接,对党章部分条文作适当修改十分必要。    实现巡视全覆盖,开展中央单位巡视、市县巡察,是巡视工作实践经验的总结,必须加以坚持和发展;推进"两学一做"学习教育常态化制度化;明确中央军事委员会实行主席负责制,明确中央军事委员会负责军队中党的工作和政治工作,反映了军队改革后的中央军委履行管党治党责任的现实需要,等等,是党的十八大以来党的工作和党的建设成果的集中反映。把这些内容写入党章,有利于全党把握党的指导思想与时俱进,用习近平新时代中国特色社会主义思想武装头脑、指导实践、推动工作,有利于强化基层党组织政治功能,推动全面从严治党向纵深发展。

MORE

2017-11-10

The "Aegis Security" team of the Institute of Intelligent Security Technology and Equipment of our hospital successfully entered the finals of the Public Security Innovation and Entrepreneurship Competition.

On October 28, 2017, the "three-dimensional anti-terrorism protection system" project of the "Aegis Security" team of the Institute of Intelligent Security Technology and equipment of Tianjin High-end equipment Research Institute of Tsinghua University (hereinafter referred to as "Security Institute") performed outstandingly in the preliminary and semi-finals of the "second Jiangxi Public Security Innovation and Entrepreneurship Competition" and successfully entered the finals. The competition is jointly organized by Jiangxi Provincial Science and Technology Department, Provincial Development and Reform Commission, Provincial Industry and Information Commission and other relevant departments. The opening ceremony of the innovation and entrepreneurship competition "three-dimensional anti-terrorism protection system" is a successful demonstration to promote the combination of research institutions and industries and realize the application and promotion of technology. By displaying the achievements of innovation and entrepreneurship, it can stimulate the team's enthusiasm for innovation and entrepreneurship, effectively promote the transfer and transformation of scientific research and teaching achievements, and actively use the "Internet" mode to promote the innovation and development of public security industry by means of digital, intelligence and information. The launching ceremony of the competition was held on September 15, 2017 at Peking University Science and Technology Park, Nanchang Economic and Technological Development Zone, Ganjiang New District, and the opening ceremony of the "2017 Jiangxi Province Double Innovation Week. On October 28, 2017, the preliminary competition was officially held in the School of Information Management of Jiangxi University of Finance and Economics. Experts from Jiangxi Provincial Department of Science and Technology, Provincial Development and Reform Commission, Provincial Industry and Information Commission, Provincial Department of Human Resources and Social Security, Provincial Department of Education, Provincial Work Safety Supervision Bureau, Provincial Food and Drug Administration, Experts recommend by the Provincial Committee of the Communist Youth League and the Provincial Association for Science and Technology conducted an objective and fair review. After careful examination and strict screening by the organizing committee, 106 of the more than 190 events were selected to enter the semi-finals. The semi-finals were judged by three rounds of judges and one round of resurrection by judges. A total of 49 contestants successfully advanced to the finals. The final will be held at 8:30 a.m. on November 11, 2017 at the Graduate School of Qianhu Campus of Nanchang University. I wish the "Aegis Security" team will continue to work hard in this final, carry forward its style, give full play to its advantages, and achieve excellent results again. The Security Institute will also continue to give full play to the aggregation effect of R & D resources, promote the coordinated development of scientific and technological innovation and industrial manufacturing, and strive to make its own contribution to the modernization, informatization and digital construction of China's national defense. Intelligent Security Technology and Equipment Research Institute Report/Zhang Qiongfang Zhang Caiqin Figure/Zhang Caiqin

MORE

2017-11-13

The Research Center for Wheel-Rail Relations and Maintenance has recently carried out a number of international exchanges and cooperation.

Under the leadership of Zhai Wanming, academician of the Chinese Academy of Sciences, the wheel-rail relationship and maintenance research center of Tianjin High-end equipment Research Institute of Tsinghua University (hereinafter referred to as "wheel-rail center") has always regarded international cooperation in the field of rail transit technology as one of its key tasks. Recently, the wheel-rail center has carried out a number of international exchanges and cooperation. On October 5-8, 2017, academician C.MichaelWalton of the American Academy of Engineering visited, and the relevant person in charge of the wheel and rail center received academician Walton and his party in Beijing. On the evening of October 7, Wang Xingming, deputy chief engineer of China Railway Corporation Limited, and Feng Quanbao, deputy director of the wheel-rail center, met with Academician Walton. The two sides exchanged views on the recent technical cooperation between China and the United States in the field of rail transit. On October 18-21, 2017, the person in charge of the wheel and rail center once again docked with the US exchange and cooperation project and received the visiting academician KumaresC Sinha of the US Academy of Engineering. The two sides made preliminary contact on the possible direction of cooperation in the future, which also laid the foundation for the follow-up docking cooperation. Wang Xingming, deputy chief engineer of China Railway Corporation Limited, and Feng Quanbao, deputy director of the Wheel and Rail Center, met with Walton Academician C.MichaelWalton, academician of the American Academy of Engineering, tenured professor at the University of Texas at Austin, and served as the American Academy of Engineering Transportation Committee TRB Executive Chairman, Chairman of the Transportation Development Research Institute of the American Society of Civil Engineering and other important positions. In the past 40 years, he has been engaged in the research of intelligent transportation, cargo transportation, transportation planning, transportation economy and policy for a long time. He has a high international reputation in the industry and is a top scholar with great influence all over the world. Academician KumaresC.Sinha is a well-known expert in the field of international transportation engineering. He was elected as a member of the National Academy of Engineering in 2008 and is an important figure in the field of transportation engineering research and education in the United States. Sinha has also served as the editor-in-chief of the Journal of Transportation Engineering, a journal of the American Society of Civil Engineering (ASCE), and has made important contributions in the fields of transportation asset management, transportation policy, planning, operations, and intelligent transportation systems. Academician Sinha's visit to China to visit the Research Center for Wheel-Rail Relations and Maintenance

MORE

2017-11-13

Su Yu's decisive battle with Meng Lianggu

70年前,面对国民党反动派的大举进攻,粟裕在毛泽东军事思想指导下,以“百万军中取上将首级”的英雄气魄,在孟良崮一举歼灭国民党王牌整编第74师,粉碎了国民党军对山东的重点进攻,扭转了华东战局,创造了中外战争史上的奇迹,加速了中国革命胜利的进程。   陈毅:“粟司令的命令就是我的命令”   1947年,刚满40岁的粟裕,作为华东野战军的副司令员,可谓意气风发。殊不知,此时的粟裕正面临着前所未有的巨大压力。蒋介石调集了国民党45万精锐大军,目的是要把陈毅、粟裕率领的华野赶过黄河,赶出山东。此时粟裕进退两难:撤退,正中蒋介石下怀;硬碰硬去打,没有必胜把握。怎么办?   粟裕天天研究地图,终于想出了一个没有办法的办法。那就是:打打停停,和国民党军在沂蒙山区捉迷藏、兜圈子,在反复的迂回穿插中寻找战机。我华野或东或西,或南或北,与敌人兜了两个多月的圈子,把国民党负责山东“剿共”的顾祝同和汤恩伯转悠得极不耐烦,他们调集了国民党五大主力之首、张灵甫的整编第74师对我华野主力发起攻击。   粟裕决心调集全部主力围歼整编第74师。他马不停蹄地向华野各纵队下达战斗命令。6纵队副司令员皮定均曾在淮阴战役中吃过张灵甫的苦头,眼看报仇的机会到了,纵队司令部一片欢腾。不过,粟裕的这个想法即使从今天来看也是很冒险的:就算华野的9个纵队围住了整编第74师,但40万国民党大军在外围虎视眈眈,如果华野不能在最快的时间内结束战斗——全歼整编第74师,那么,外面的40万国民党军队必然会反过来把华野合围住。到时里应外合,华野势必面临全军覆灭的危险。   陈毅与粟裕俩人在新四军时期就已经开始合作。陈毅身为华野司令兼政委,对这位老部下的能力深信不疑,就把最重要的战役指挥权全盘交给了副司令粟裕,陈毅坚定而充满自信地说“粟司令的命令就是我的命令”。当粟裕把围歼整编第74师的想法告诉陈毅后,陈毅把帽子往桌上一摔说:“我不走了,就打74师吧。百万军中取上将首级。”   此前,张灵甫曾指挥整编第74师充当先锋,对华野连战连捷,迫使华野退出两淮进入山东。蒋介石对此非常满意。对粟裕这个对手,张灵甫有些轻敌,他此刻的注意力全在自己人身上。进入沂蒙山区后,整编第74师的优势无法得到发挥——张灵甫是希望把主力控制在平原地区,但上级的命令他必须遵守。为此他曾经发过牢骚:“我是重装备部队,在平原作战,我的炮火能发挥威力,陈毅的二三十万人都来打我,我也能应付。现在让我进入山区作战,等于牵着水牛上石头山,跟我过不去,一定要我死,我就死给他们看看吧!”也许,这只是一句气话,但看得出,张灵甫对敌我双方的态势,心里还是很清楚的。但身为职业军人,服从命令是天职。就这样,他一步一步地走进了解放军的包围圈。   抢得先机切断敌军后路   为了吃掉整编第74师,粟裕拿出了华野全部的9个主力纵队。20多万部队星夜兼程,用最快的速度穿插运动,向整编第74师靠拢。由于情报可靠,各纵队的穿插路线极为精确,不知不觉就把整编第74师从国民党军的大部队里孤立出来,切断了它与友军的联系。但就在大战一触即发之际,一个谁也没有预料到的突发事件差一点就让这次大规模战役泡了汤。   1947年5月13日晚7点多,华野1纵开始在整编第74师与国民党军整编第25师之间穿插。就在1纵向纵深前进时,整编第74师与他们不期而遇。一个在山岗上,一个在山坡下,两军相向而行。两支敌对的军队在同一座山上行军,居然相安无事、各走各路,成就了战争史上的一大奇观。张灵甫以为这支部队是友军,一点儿也没放在心上,他哪能料到这支部队竟然是解放军呢!   5月14日,战斗正式打响。几个小时之后,张灵甫索性一不做、二不休,把他的整编第74师拉上了孟良崮。沂蒙当地人把又高又平的山头称为“崮”,部队拉上孟良崮,好处是居高临下,易守难攻,所有的敌情都能尽收眼底,但坏处是一旦陷入弹尽粮绝的境地,就只有死路一条。善用奇兵、胆略过人的张灵甫,决心以自己为诱饵吸引华野主力。   粟裕在得到这个消息后,也不禁暗中佩服这个老对手的勇气和决心。但这个方法要取得成功,必须有一个前提,就是整编第74师要能够坚守足够长的时间,并且周围的援军也要能够及时赶来。如果能,就是里应外合,佳谋天成;如果不能,其结果极有可能造成瓮中捉鳖、坐以待毙。面对张灵甫摆出的这步棋,用兵一向谨慎的粟裕此刻已经别无选择,他只能命令部队全力进攻,尽量用最快的时间吃掉整编第74师!   不过,张灵甫也隐隐感到被包围的危险,所以他事先给自己留下了一招摆脱困境的后手,这就是派部队控制住孟良崮旁边一个毫不起眼的小镇——垛庄。这个镇子虽小,但却是整编第74师与后方大部队联系的战略要地。张灵甫派了一个团驻守于此,一旦战局不利,便可以迅速通过这里与大部队会合,做到可进可退,到那时,粟裕纵有三头六臂,也只能徒呼奈何。张灵甫想得不错,却没料到他的对手也想到了这一点,而且行动比他更快。长期以来,每当作战,粟裕最大的爱好就是背地图,战场上的一草一木,每一座桥梁、每一条壕沟,都不落下,而且还要实地勘察,把战场附近的地形记得烂熟于心,并要求部下也要做到。此时面对张灵甫的后手,粟裕早已有了对策,他令旗一挥,命令隐蔽在鲁南待命的华野6纵星夜兼程直扑垛庄。5月15日拂晓,6纵攻占下了垛庄,这样,华野对整编第74师的合围全部完成。   “百万军中取上将首级”   整编第74师开始拼命了,战斗中,我军的伤亡很大。敌人的意图不仅是要救出张灵甫和整编第74师,同时要乘机全歼华野主力。因此对陈毅、粟裕来说,当务之急是用最快的速度歼灭整编第74师,否则时间一旦拖长,就有可能反遭灭顶之灾。此时一向谦和文雅的粟裕急了,他对各纵队司令们说:“哪怕纵队打光了,只要能把敌人消灭也在所不惜……谁攻上孟良崮,谁就是英雄!现在只有冲锋,后退就是死亡!”   相比之下,张灵甫虽然也是名将,却犯下了一系列致命性的错误。垛庄失守,张灵甫心里一惊,却不以为然,毕竟自己装备精良,友军又近在咫尺,就算自己被合围了,仗着整编第74师超强的装备和战斗力,坚持到援军到来应该不在话下。但他却忘了,孟良崮是石山,在坚硬的岩石上无法构筑工事,他的部队只能暴露在华野密集的火力之下,一发炮弹打过来,溅起的每一块石头都有致命的危险。   张灵甫还犯下了另外一个最严重的错误:他忘记了离他最近的援军是国民党整编第83师,师长是李天霞。张灵甫和李天霞同为黄埔毕业,又同是第74军(整编第74师前身)军长王耀武的亲信。不过此前,他们俩人为了争夺整编第74师师长的位置曾明争暗斗,结果张灵甫把李天霞挤了下去,李天霞对此一直怀恨在心。当张灵甫在孟良崮上苦苦鏖战时,李天霞虽然只距离他仅有10公里,但是李天霞只是象征性地派了一个连前进到孟良崮东侧,余部则按兵不动,眼睁睁地看着张灵甫挨打。   尽管李天霞消极以对,但张灵甫的另一支援兵黄百韬的整编第25师却极力援救张灵甫,全速向华野阻援部队发起攻击。华野攻击部队伤亡越来越大,弹药补给也出现了困难。已经有指挥员提出:停止攻击,撤出战斗,以防被敌人包了饺子……粟裕清楚,此刻决定战局走向的只有指挥员的决心。他下令任何人不准撤退,24小时内必须拿下孟良崮。最后的总攻是5月16日凌晨发起的,这场激烈的战斗一直持续了16个小时才结束。华野最终攻占孟良崮,张灵甫阵亡,整编第74师宣告覆灭。   整编第74师的覆灭以及张灵甫殒命的消息,像晴天霹雳震撼了国民党统治中心,蒋介石哀叹“这是我军剿匪以来最可痛心、最可婉惜的一件事”。而此战役也成就了粟裕“百万军中取上将首级”的壮举。2017年11月13日来源:学习时报

MORE

2017-11-15

"Tsinghua Peking University Students Dongli Travel" Enters Our College

On November 11, 2017, a group of more than 30 students from Tsinghua University and Peking University came to Tsinghua University Tianjin High-end Equipment Research Institute (referred to as "High-end Institute") for a visit and study. The event was led by Wu Yannan, deputy director of the Dongli District Talent Office, Fan Jing, Assistant Minister of the Department of High-end Hospitals, and the Institute of Robotics and Automation Equipment Engineering (referred to as the "Robot Institute") and the Laser Engineering Institute (referred to as the "Laser Institute") Relevant persons in charge participated in the reception activities. Tsinghua Peking University students visited and studied in the exhibition hall of the high-end institute. In the publicity exhibition hall of the high-end institute, the students first learned about the construction form, social significance, development process and operation mode of our institute as a professional expatriate institute of Tsinghua University, and listened carefully to the introduction of scientific research achievements involving more than 30 teams in seven major fields, including robot and automation equipment technology, additive manufacturing (3D printing) and laser processing technology; in the exhibition hall of the robot institute visited later, the technicians explained the research and development, application and delivery of products such as automatic spraying intelligent robots, assembly robots, and live working robots developed based on Tianjin market demand. During the visit to the laser institute, the students showed great interest in the information of solid laser equipment in research and development, development and market feedback, and participated in the exchange and interaction one after another. Tsinghua Peking University students visited the high-end institute in the exhibition hall of the Laser Institute as a school-local cooperation base and a talent training base. It is the key exchange and learning unit of the "Tsinghua Students Dongli Tour" activity and has organized and received the "Tsinghua Students Dongli Tour" activity many times. In the future, our hospital will continue to play the leading role of the compound, build a platform for the exchange of high-end talents, and help the introduction of talents in Tianjin and Dongli District. Department of Hospital Affairs Enterprise Publicity Office Report/Wang Xiaotu/Wang Xiao

MORE

2017-11-15

Xu Yingwu, Chief Economist of Tianjin Development and Reform Commission, accompanied the person in charge of the relevant Hebei Provincial Committee Office to visit our hospital.

On November 10, 2017, Xu Yingwu, chief economist of Tianjin Development and Reform Commission, accompanied Song Limin, deputy secretary and deputy director of Hebei Provincial Development and Reform Commission, Li Congmin, deputy director of Hebei Provincial Department of science and technology, Wang Jianfen, deputy inspector of Hebei Provincial Department of industry and information technology, quiet, director of Investment Promotion Bureau of Hebei Provincial Department of Commerce, and Zhang Lange, deputy director of Hebei Provincial Department of land and resources, visited our hospital. Zhang Xiangjun, vice president of Tianjin High-end equipment Research Institute of Tsinghua University (hereinafter referred to as "High-end Institute"), and Fan Jing, assistant minister of hospital affairs, received Xu Yingwu and his party. Fan Jing introduced in the exhibition hall of the high-end institute. Fan Jing first introduced the construction process, system and mechanism, operation mode and development status of our institute in the exhibition hall of the high-end institute. Then he introduced in detail the scientific research achievements and industrialization progress of our institute and research office in the achievement exhibition area. Visiting guests showed great interest in many technologies and industrialization achievements of our hospital, especially in detail about robot and automation equipment technology, additive manufacturing technology, Salix wood manufacturing technology, surface interface micro-nano technology and industrial products such as formaldehyde purification cloth. At the end of the visit, Zhang Xiangjun interacted with the visiting guests on the important role of the high-end institute as a platform for technological transformation and industrial incubation and the management incubation mode. The person in charge of the relevant committee office of Hebei Province affirmed the innovative management mode and industrialization achievements of the high-end institute, and hoped to connect with relevant enterprises in Hebei Province in the future, give full play to the advantages of the high-end institute platform, provide services for the technological upgrading of enterprises in Hebei Province, and promote the coordinated development of Beijing, Tianjin and Hebei. Department of Hospital Affairs Enterprise Publicity Office Report/Wang Xiaotu/Wang Xiao

MORE

< 1...303132...165 > proceed page
< 1...303132...165 > proceed page